Bogen LUAMFMT manual Package Contents, Description, Antenna Connection

Digital AM / FM Tuner

Package Contents

Your carton contains:

*Digital AM/FM Tuner unit

*FM Antenna

*AM Loop Antenna

*Stereo-to-mono Cable

*Mono-to-mono male RCA Cable

Description

This Lucent Technologies AM/FM Tuner incorporates the latest in PLL digital circuitry for reliable performance for years to come.

Antenna Connection

This unit is designed for connection to various antenna systems as described below.

CAUTION: For external antennas, use No. 8 AWG aluminum wire, or larger, as ground wires for both mast and lead-in, and secure to building structure with insulators spaced 4 to 6 feet apart. Mount antenna discharge unit as closely as possible

to where the lead-in enters the building.

connector panel

120VAC 60 Hz/4W

MODEL TP-30D

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2)this device must accept any interference that may cause undesired operation.

	BOGEN	AM	300 OHM
R O		ANT	BAL
	COMMUNICATIONS
U	RAMSEY, N.J.		75 OHM
T
P

L U

T

External FM Antenna. If installing a standard 300-ohm antenna system, connect the two wires from the‘T’ antenna to the screw terminals marked 300-ohm. At the same time, remove any jumper wires connected to these terminals. If conditions require the use of a coaxial transmission line, such as RG-11 or RG-59, connect the coaxial transmission line to the screw terminals marked 75-ohm.

Always disconnect any jumper wire connected to the 300-ohm terminals when using an external FM antenna.

AM Loopstick Antenna - Use an external AM antenna for AM reception.

1. Carefully pull the antenna lead from the holding notch in the antenna and unwind the lead from the loop.

AM LOOP ANTENNA

2.Connect the antenna leads to the terminals marked AM ANT.

3.Fold the antenna so that it snaps into the base forming a free-standing unit (see diagram).

4.Position the antenna for best reception. If desired, the antenna may be permanently mounted using screws through the two holes in the base.

Page 3 of 4