RPK88 Rack Mount Kit
Installation and Use Manual
The RPK88 Rack Mount Kit is designed to flush mount the components of a PCM system.The RPK88 will hold up to ten modules in two assemblies.The RPK88 allows easy mounting of these modules in a standard
RPK88 Mounting Plate
1 | START HERE | Remove additional panels to fit |
|
| |||||
(Panel left open) |
|
| |||||||
|
|
|
|
| assembled PCM system (beginning |
|
| ||
|
|
|
|
|
|
| |||
|
|
|
|
| here, then work left to right) | #6 x 1/4” | Mounting | ||
|
|
|
|
| |||||
|
|
|
|
|
|
|
| Screws (8) | Brackets (8) |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Four | Six | Wiring | |
Modules | Modules | ||
Saddles (12) | |||
Max. | Max. | ||
|
Plug wiring saddles into any of 12 staggered holes as needed
power cord (as needed, two total) | access (as needed, six total) |
| 3 |
| 2 |
2
3
1Remove appropriate knock- out panels.
2Attach mounting brackets to top and bottom corners of module assembly.
Use screws included with modules.
3Attach module assembly to RPK88 using #6 x 1/4” screws.
See PCM system instructions for module assembly.
© 2005 Bogen Communications, Inc. All rights reserved.
Specifications subject to change without notice.