Bogen Architect, and Engineer, or WBS8T725V, WBS8T725BR, or, Line Drawings WBS8T725BR

Architect

WBS8T725 The surface-mounting loudspeaker assembly shall be a Bogen model WBS8T725

(For WBS8T725BRV add) A terminal strip shall be included for connection of the audio line.

and Engineer

(or WBS8T725V, WBS8T725BR, or

Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8-

Specifications

WBS8T725BRV), or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50 Hz to 12 kHz. Axial sensitivity shall be 95 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 6 oz. ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loud- speaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length.

The loudspeaker shall be assembled in a wall baffle for surface mounting, angled 13.5 degrees for down- ward sound dispersion. The baffle shall be con- structed of 3/8” particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints.The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D (top) x 3-1/4" D (bottom).

(For WBS8T725V add) The assembly shall include a control for adjusting the volume of the loudspeaker.

(For WBS8T725BR add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8-watt power connection.

watt power connection.A control shall also be includ- ed for adjusting the volume of the loudspeaker.

WBS810T725 The surface mounting loudspeaker shall be a Bogen model WBS810T725, or equiva- lent, 8" cone-type loudspeaker having a frequency response of at least 70 Hz to 15 kHz. Axial sensitiv- ity shall be 96 dB, measured at 1-watt/4-feet. The loudspeaker shall have a 10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length.

The loudspeaker shall be assembled in a wall baffle for surface mounting, angled 13.5 degrees for down- ward sound dispersion. The baffle shall be con- structed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D (top) x 3-1/4" D (bottom).

Line

Drawings

WBS8T725BR

Rear View Side View

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com