Operation

Front Controls & Indicators

Power Switch

The Power Switch for the Black Max amplifier is located on the front of the unit. Press the "I" side of the switch to turn the unit ON. The amplifier will begin its power up process once turned on. If the amplifi- er is set up for power sequencing (see the section on power sequenc- ing), the amplifier may not begin its power up process but rather wait in a standby state until it receives a sequence trigger.

The Power Switch is also the amplifier’s circuit breaker. Should the breaker trip, simply place it in the OFF position and then back to ON to reset the breaker.

Note: If the Power Sequencing Switch is in the ON position, but the wiring is not properly configured, the unit will appear dead. Review the Sequential Turn-On section for proper wiring.

I O

Front Indicators

The front of the Black Max amplifier contains 3 different types of indi- cators for each channel.

LIMIT - When illuminated, it indicates a condition in which the ampli- fier is limiting and automatically reducing signal level to reduce the overload condition. Limiting is a result of speaker load impedances that are too low or input signals that are too high, which drive the outputs beyond their operational ranges.

SIGNAL - When illuminated, it indicates that there is signal at the output.

STATUS - Illuminates in three different colors to indicate current operational status of the amplifier.

Green

-

Indicates that the amplifier is operating normally.

Amber -

Indicates that the amplifier is in Sleep mode.

Red

-

Indicates a fault condition and that the amplifier has dis-

 

 

connected the output load as a safety precaution.

Rear Controls & Indicators

Level Controls

Use the rear-mounted Level Controls on the Black Max amplifier to adjust output volume of each channel independently.

Lo-Cut Switch

The Lo-Cut filter allows a low frequency roll-off starting at 60Hz to be introduced into the signal path preventing the speakers from receiving too much low frequency content. The Lo-Cut Filter Switch should be turned on when using typical inexpensive, transformer-coupled cone- type speakers found in paging systems.

The Black Max amplifier is a direct-coupled amplifier, which means that there are no output transformers used to deliver the 70V audio to the speakers. Because of this, the Black Max amplifier has a flat frequency response down to and below 20Hz.This extended low frequency oper- ation can be troublesome for some transformer-coupled speakers used in 70V audio systems. Relatively inexpensive transformers used in some speakers cannot handle frequencies below 60Hz. When frequencies lower than this are applied to these speakers’ transformers, they can saturate causing distortion and high instantaneous power consumption.

8

Page 10 Page 12
Page 11
Image 11
Bogen X300, X600, X450 manual Operation, Front Controls & Indicators, Rear Controls & Indicators
Page 10 Page 12

X300, X450, X600 specifications

The Bogen X600, X450, and X300 models represent the pinnacle of professional audio solutions, catering to a variety of sound reinforcement needs. Renowned for their superior performance, these amplifiers showcase cutting-edge technologies and features designed to enhance audio quality in diverse environments.

Starting with the Bogen X600, this powerhouse amplifier boasts a robust 600 watts of output power, making it ideal for large venues such as auditoriums and concert halls. Its innovative design incorporates advanced cooling technology, allowing for efficient heat dissipation and extended usage without performance degradation. The built-in digital signal processing (DSP) capabilities offer users a range of customizable audio settings to fine-tune the sound, ensuring optimal clarity and richness. Additionally, with multiple input options including XLR, line, and RCA, the X600 provides flexibility for various sound sources.

Next, the Bogen X450 is designed for medium-sized applications, producing 450 watts of output power. It maintains a compact, lightweight design without compromising on sound quality. The X450 features an intuitive user interface with easy-to-navigate controls, making it user-friendly for technicians and performers alike. It includes onboard effects such as reverb and delay, which can be adjusted in real-time, adding depth and dimension to live performances. The amplifier's rugged construction ensures durability, making it perfect for both fixed installations and mobile use.

Finally, the Bogen X300 is the entry-level offering in this impressive lineup, delivering 300 watts of output power. Despite its lower wattage, the X300 does not skimp on sound performance, making it ideal for small venues and events. This model is equipped with essential features such as built-in EQ controls, which enable users to tailor audio output to specific acoustics. The X300's lightweight chassis allows for easy transport, while its durable design ensures longevity.

All three models come with protection circuits to prevent damage from short circuits or overheating, ensuring reliable operation during critical performances. Their seamless integration with other audio equipment enables users to expand their sound systems effortlessly. Bogen's X series amplifiers stand out for their exceptional audio fidelity, making them a popular choice among audio professionals seeking versatile and high-performing sound reinforcement solutions. Whether for large concerts or intimate gatherings, the X600, X450, and X300 meet diverse audio requirements with excellence.
Top Page Image Contents