Manuals / Bolens / Lawn and Garden / Tiller

Bolens 12180 Tiller Specifications/Attachments, Tiller Attachments, Tiller Length, Tiller Width

Models: 12180

1 28

Download 28 pages 55.32 Kb

Page 26

TILLER SPECIFICATIONS/ATTACHMENTS

TILLER SPECIFICATIONS

TILLER HEIGHT (with Depth Regulator Lever in highest setting):
Without Handlebars	25-1/2"
Handlebars in lowest setting	38-1/4"
Handlebars in highest setting	47-1/2"
TILLER LENGTH
Without Handlebars	38"
Handlebars in lowest setting	57"
TILLER WIDTH
Hood Width	17-1/2"
Tilling Width	16"
Wheel Width	17-1/2"
Handlebar Width	18"
TILLER WEIGHT
Approximate Weight (without oil or gas)	132 lbs.

TRANSMISSION GEAR OIL SPECIFICATIONS

For small top-offs: Use SAE 140, SAE 85W-140, or SAE 80W-90 gear oil with an API rating of either GL-4 or GL-5.

For Full Replacement: Use SAE 140 or SAE 85W-140 gear oil with API rating of GL-4 (do not use GL-5).

TILLER ATTACHMENTS

The attachments listed below are available for your tiller. The information is the most current at the time this manual was printed. Contact your authorized dealer or the factory for current information.

BUMPER

A tubular steel bumper surrounds the engine to protect the air cleaner, starter assembly and fuel tank from damage. The bumper is easy to install using existing engine mounting hardware.

FRAME WEIGHTS

Solid steel weights attach to the sides of the frame to provide added traction to the wheels. Installation hardware is included.

26

Image 26

Bolens 12180 Tiller Specifications/Attachments, Tiller Attachments, Tiller Length, Tiller Width, Tiller Weight, Bumper

Contents

Model 12180 Safety Assembly Controls Operation MaintenanceBRONCOTM 5 HP Model Tiller Safety Alert Symbol Table of ContentsSee Page 27 for Customer Service Information SECTION 1 SAFETYTraining 1 SafetySection Preparationc. Use slower engine speeds Section 1 SafetyMaintenance and Storage Section 1 Safety Operating SymbolsDecals Figure 1 Location of Safety and Operating DecalsIntroduction 2 AssemblyTools/Materials Needed for Assembly Inspect unitSTEP 3 Move Tiller Off Shipping Platform Section 2 AssemblySTEP 2 Attach Handlebar K I H ASection 2 Assembly STEP 4 Install Forward Clutch CableSTEP 5 Install Reverse Clutch Cable R T P A T U SSTEP 9 Check Air Pressure in Tires STEP 6 Check Level of Transmission Gear OilSTEP 8 Check Hardware for Tightness STEP 7 Add Motor Oil to EngineAdjustment 3 Features and ControlsWheel Drive Pins SectionSection 3 Features and Controls Forward Clutch BailReverse Clutch Control To Operate the Forward Clutch BailENGINE CONTROLS Section 3 Features and ControlsHandlebar Height Adjustment Depth Regulator LeverINTRODUCTION 4 OperationDANGER BREAK-IN OPERATIONSection 4 Operation OPERATING THE TILLERStopping the Tiller and Engine Turning the Tiller AroundSection 4 Operation Figure 4-5 With tiller balanced overTilling depths Tilling Tips & TechniquesLet the tiller do the work Avoid tilling soggy, wet soilC. Tilling across slopes without using terraces Clearing the tinesTilling on slopes Tilling Tips & TechniquesSection 4 Operation POWER COMPOSTINGLOADING AND UNLOADING THE TILLER PROCEDURE 5 MaintenanceREQUIRED MAINTENANCE SCHEDULE SectionTILLER LUBRICATION Section 5 MaintenanceTRANSMISSION GEAR OIL SERVICE CHECK FOR OIL LEAKSSection 5 Maintenance BOLO TINESB A B C. Removing a Tine AssemblyTo Check Belt Tension ENGINESection 5 Maintenance Section 5 Maintenance FORWARD CLUTCH BAIL ADJUSTMENTD C A Replacement Belt InformationAIR CLEANER SERVICE ENGINE OIL SERVICEENGINE CLEANING SPARK PLUG SERVICECORRECTION PROBLEMPOSSIBLE CAUSE Section 5 MaintenanceTILLER ATTACHMENTS TILLER SPECIFICATIONS/ATTACHMENTSTILLER SPECIFICATIONS TILLER WEIGHTCustomer Service and Technical Service CUSTOMER SERVICE INFORMATIONWarranty Service Replacement Parts1905237 1/99 1999 Garden Way Incorporated