SECTION 3: ASSEMBLING YOUR LAWN MOWER

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton. Remove loose parts if included with unit (i.e., operator’s manual, etc.)

•Cut along corners, lay carton down flat, and remove packing material.

•Roll or slide unit out of carton and check carton thoroughly for loose parts.

Hardware Pack

 

 

Please identify each piece

 

 

of the hardware pack as

Wing

Carriage

shown here.

Nut

Bolt

 

 

1/4-20 (2)

1/4-20 (2)

Disconnecting Spark Plug Wire

Before setting up your lawn mower, disconnect the spark plug wire from the spark plug and ground to a bolt on the engine. Leave safety key in locked position. See Figure 1.

Spark Plug

Wire

Spark Plug

Figure 1

NOTE: Reference to right or left hand side of the mower is observed from the operating position.

Assembling Handle

•Lift up and pull back on the upper handle to raise the handle into the operating position.

•Make certain the lower handle is seated securely into the handle bracket assemblies.

•Tighten the wing nuts between the upper handle and the lower handle (carriage bolts must be seated properly into the handle). See Figure 2.

NOTE: Your mower is shipped with the handle in the higher position. If you wish to lower the height of the handle, refer to the Adjustment Section at this time.

2. Lift lower handle

1. Move bag

away

3. Lift upper

handle

Figure 2

•Remove the hairpin clips from the outer hole in the weld pins on the handle bracket assemblies. Using a pair of pliers, squeeze one leg of the lower handle against the handle bracket assemblies. Insert the hairpin clip into the inner hole on the weld pin. Repeat on other side. See Figure 3.

•After you have moved the hairpin clip, install the carriage bolt, (carriage bolt must go to the inside of handle) included in the hardware pack, in the upper hole on the handle mounting bracket. Secure with one plastic wing nut, also included in the hardware pack. See Figure 3. Repeat process on other side.

Carriage Bolt

Upper

Hole

Handle

Mounting

Brkt.

Wing Nut

Move Hairpin Clip

Figure 3

•Fasten the cable to the lower handle with the two cable ties found on the lower handle. Pull the cable ties tight and trim off the excess. See Figure 4.

Cable Tie

Lower

Handle

Figure 4

7

Page 6 Page 8
Page 7
Image 7
Bolens 589 manual Assembling Your Lawn Mower, Removing Unit From Carton, Hardware Pack, Disconnecting Spark Plug Wire
Page 6 Page 8

589 specifications

The Bolens 589 is a versatile riding lawn mower that captures the essence of performance, durability, and user-friendly design. Built to meet the needs of both residential homeowners and landscaping professionals, this machine is equipped with features that optimize mowing efficiency and enhance user experience.

One of the standout characteristics of the Bolens 589 is its powerful engine. It typically features a robust 19 to 20 horsepower engine that ensures efficient cutting power, making it suitable for larger lawns and rugged terrains. This powerful engine is paired with a reliable automatic transmission that provides smooth and easy maneuverability, allowing users to tackle various yard sizes without difficulty.

The cutting deck on the Bolens 589 is designed for precision and durability. With a width ranging from 42 to 46 inches, it is capable of making quick work of grass while leaving a clean, professional finish. The deck is made from heavy-duty steel, ensuring it can withstand the rigors of regular use. Additionally, the deck height can typically be adjusted to suit different grass types and cutting conditions, giving users the flexibility they need for various lawn care tasks.

In terms of comfort, the Bolens 589 is built with the operator in mind. It features a plush, adjustable seat that provides support during extended mowing sessions. The controls are intuitively placed, allowing for effortless operation and quick adjustments while driving. Enhanced visibility from the driver's seat is another design consideration that bolsters safety and effectiveness when mowing in tight spaces.

Innovation is evident in the Bolens 589 with its inclusion of modern technologies. Some models may include features like LED headlights for improved visibility during early morning or late evening mowing sessions, and mulching capabilities that allow for finer grass clippings that can be left on the lawn as natural fertilizer.

Moreover, the Bolens 589 often showcases a durable frame to withstand seasonal changes and heavy use. Its robust construction not only extends the life of the equipment but also ensures stability on uneven surfaces. Combined with a user-friendly maintenance system, the Bolens 589 makes upkeep simple and efficient, allowing owners to focus more on lawn care.

Overall, the Bolens 589 is a well-rounded riding lawn mower that excels in providing power, comfort, and ease of use. With its combination of features and technologies, it stands as a strong contender in the market, meeting the diverse needs of grass enthusiasts and professionals alike.
Top Page Image Contents