OIL AND PETROL INFORMATION

OIL AND PETROL MIXING INSTRUCTIONS

Old and/or improperly mixed petrol are the main reasons for the unit not running properly. Be sure to use fresh, clean unleaded petrol. Follow the instructions carefully for the proper petrol/oil mixture.

Definition of Blended Petrols

Today's petrols are often a blend of petrol and oxygenates such as ethanol, methanol, or MTBE (ether). Alcohol-blended petrol absorbs water. As little as 1% water in the petrol can make petrol and oil separate. It forms acids when stored. When using alcohol-blended petrol, use fresh petrol (less than 60 days old).

Using Blended Petrols

If you choose to use a blended petrol, or its use is unavoidable, follow recommended precautions:

•Always use the fresh petrol mix explained in your operator's manual

•Always agitate the petrol mix before fueling the unit

•Drain the tank and run the engine dry before storing the unit

Using Petrol Additives

The bottle of 2-cycle oil that came with your unit contains a petrol additive which will help inhibit corrosion and minimize the formation of gum deposits. It is recommended that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for air-cooled engines along with a petrol additive, such as STA-BIL®Petrol Stabilizer or an equivalent. Add 23 ml (0.8 oz) of petrol additive per gallon of petrol according to the instructions on the container. NEVER add petrol additives directly to the unit's petrol tank.

CAUTION: For proper engine operation and maximum reliability, pay strict attention to the oil and petrol mixing instructions on the 2-cycle oil container. Using improperly mixed petrol can severely damage the engine.

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded petrol in a separate petrol can. Use a 40:1 petrol/oil ratio. Do not mix them directly in the engine petrol tank. See the table below for specific petrol and oil mixing ratios.

NOTE: 3.8 liters (1 US gallon) of unleaded petrol mixed with one 95 ml (3.2 oz) bottle of

2-cycle oil makes a 40:1 petrol/oil ratio.

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNLEADED PETROL

 

 

2 CYCLE OIL

 

 

 

 

 

 

3.8 LITERS

 

 

95 ml

(1 GALLON US)

 

 

(3.2 FL. OZ)

 

 

 

 

 

 

 

 

1 LITER

 

 

25 ml

 

 

 

 

 

 

 

 

MIXING RATIO - 40:1

WARNING: Petrol is extremely flammable. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the petrol tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove petrol cap slowly to avoid injury from petrol spray. Never operate the unit without the petrol cap securely in place.

WARNING: Add petrol in a clean, well ventilated outdoor area. Wipe up any spilled petrol immediately. Avoid creating a source of ignition for spilt petrol. Do not start the engine until petrol vapors dissipate.

NOTE: Dispose of the old petrol/oil mix in accordance to Federal, State and Local regulations.

10