PCI IDE BusMaster [Enabled]

Allows BIOS to use PCI bus mastering when reading/writing to IDE devices. Configuration options: [Disabled] [Enabled]

IRQ xx assigned to [Available]

When set to [Available], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [Available] [Reserved]

2.4.6USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then press Enter to display the configuration options.

Onboard

SiS

USB1.1

DEVICE

[Enabled]

<Enter> to enable or

disable.

Onboard

SiS

USB2.0

DEVICE

[Enabled]

 

USB Configuration

Module Version - 2.24.0-9.4

USB Devices Enabled: None

Legacy USB Support

 

[Auto]

USB 2.0 Controller

Mode

[HiSpeed]

Stop EHCI HC in OHCI handover

[Enabled]

OnBoard SiS USB 1.1 Device [Enabled]

Allows you to enable or disable the onboard SiS USB 1.1 device. Configuration options: [Disabled] [Enabled]

OnBoard SiS USB 2.0 Device [Enabled]

Allows you to enable or disable the onboard SiS USB 2.0 device. Configuration options: [Disabled] [Enabled]

¥ The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None.

¥Set to [Disabled] if you are using a Windows¨ 98SE or Windows¨ ME OS.

2 - 24

Chapter 2: BIOS Setup