To adjust the saddle tilt

Th mu

hid ins

bik

Figure 5- Minimum insertion

mark on seatpost

1.Loosen the saddle clamp bolt several turns.

2.While tilting the saddle, apply pressure to the top of the saddle directly above the saddle clamp.

Pressure on the saddle helps release the compression wedges.

3.Tilt the saddle to the desired angle.

4.Follow the Inspection procedures to re-tighten the saddle

clamp bolt.

To adjust the saddle height

1.Loosen the seatpost binder bolt, or quick-release.

2.Slide the seatpost up or down to your preferred saddle position.

3.Make sure the minimum insertion mark (Figure 4) on the seatpost is not visible above the bike frame. A minimum of 2 1/2 inches (64 mm) of seatpost must remain in the frame.

4.Re-tighten the seatpost quick-release, or bolt, as described in

Inspection

WARNING

A seattpost that is positioned too high can damage the bike and caan cause you to lose control and fall. Make sure the minimum insertion mark (Figure 5) is inside the frame.

Bontrager Warranty

Trek Bicycle Corporation warrants each new Bontrager seatpost against defects in workmanship and materials for the a period of one year from the date of sale. This warranty is expressly limited to the repair or replacement of a defective seatpost and is the sole remedy of the warranty. This warranty applies only to the original owner and is not transferable.

Claims under this warranty must be made through an authorized Bontrager dealer. Proof of purchase is required.

The warranty does not cover normal wear and tear, improper assembly or follow-up maintenance, or installation of parts or accessories not originally intended or compatible with the seatpost as sold.

The warranty does not apply to damage or failure due to accident, misuse, abuse, or neglect. Modification of the seatpost shall void this warranty.

Trek Bicycle Corporation shall not be responsible for incidental or consequen- tial damages. Some states do not allow the exclusion of incidental or consequen- tial damages, so the above exclusion may not apply to you. Labor charges for parts changeovers are not covered by the warranty.

This warranty gives the consumer specific legal rights, and those rights may vary from place to place. This warranty does not affect the statutory rights of the consumer.

4

Page 3 Page 4
Page 4
Image 4
Bontrager 243705 owner manual To adjust the saddle tilt, To adjust the saddle height
Page 3 Page 4

243705 specifications

The Bontrager 243705 is a high-performance bicycle component that seamlessly merges innovative technology with user-centric design, making it a favorite among serious cyclists and casual riders alike. One of the standout features of the Bontrager 243705 is its lightweight construction. Designed with both durability and performance in mind, this component is manufactured from high-quality materials that enhance strength while reducing unnecessary weight, allowing for efficient pedaling and improved speed on various terrains.

Another defining characteristic of the 243705 is its user-friendly installation process. This component comes with clear instructions and all necessary hardware, making it accessible even for those who may not have extensive mechanical knowledge. The compatibility of the Bontrager 243705 with a wide range of bicycle models further adds to its appeal, ensuring that riders can easily integrate it into their existing setups without the need for extensive modifications.

In terms of technology, the Bontrager 243705 incorporates advanced engineering principles that contribute to its performance. The component features a specially designed geometry that optimizes aerodynamics, helping to reduce drag and enhance efficiency during rides. Additionally, the innovative design takes into account the principles of weight distribution, ensuring that cyclists experience improved handling and stability, particularly at higher speeds or on challenging courses.

The Bontrager 243705 is also engineered for exceptional comfort. Its ergonomic design reduces fatigue during long rides, allowing cyclists to maintain focus and performance over extended periods. Moreover, the component undergoes rigorous testing to ensure long-lasting reliability, making it a smart investment for anyone serious about cycling.

In conclusion, the Bontrager 243705 stands out as a premier choice for cycling enthusiasts seeking a combination of lightweight design, easy installation, advanced aerodynamics, and rider comfort. With its strong construction and innovative technologies, this component represents the perfect blend of performance and usability, helping riders get the most out of their cycling experience on any journey ahead. Whether navigating city streets or tackling rugged trails, the Bontrager 243705 is engineered to meet the demands of today’s cyclists while delivering quality and dependability.
Top Page Image Contents