Security Systems
From
STVC/PRM
Product Management
Telephone
+49 911 93456 0
Nuremberg
25.06.2010
2.New Features
Updated manual and help file in German and English
3.Restrictions; Known Issues
VGA settings for VIP XD are not available in this Configuration Manager version. Must be set up via the product’s web site.
Encryption Site License (option) must be installed to make AES encryption usable.
Under Vista when using UAC, Configuration Manager must be run as administrator for valid licensing.
When using the Wizard to
FTP address must be IP address only, URL is not supported.
When the integrated
Alarm input rules of AutoDomes running firmware version 4.10 can not be configured correctly in Configuration Manager. The Web interface shall be used instead.
After changing the IP address of a device the settings page might not be updated automatically. Manual refresh might be required.
The Wizard may run into a timeout situation when configuring a camera with motion recording. A “Retry” button appears which needs to be pressed then.
When time zone had been changed in Advanced Mode, synchronization to PC in Basic Mode does not update time zone.
The “Save” button is not activated in Basic Mode when DHCP settings are changed.
In Date/Time settings page, the date and time values shown are from PC instead of from device.
Upload of a configuration file might be incomplete if it includes recording settings. It is recommended to check the settings manually.
Note:
If multiple Configuration Managers are used in the network, maintaining the same or an overlapping set of devices simultaneously, unpredictable effects might occur when writing to the devices.
2
BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany
