10 English
Electrical Safety
fWarning! Switch off, remove plug from mains be- fore adjusting, cleaning or if cable is cut, dam- aged or entangled.
fThe blades continue to rotate for a few seconds after the machine is switched off.
fCaution – do not touch the rotating blade.
Your machine is double insulated for safety and re- quires no earth connection. The operating voltage is 230 V AC, 50 Hz (for
Extension cords/leads should only be used if they comply with
If you want to use an extension cable when operating your product, only the following cable dimensions should be used:
–1.0 mm2: max. length 40 m
–1.5 mm2: max. length 60 m
–2.5 mm2: max. length 100 m
Note: If an extension cable is used it must be earthed and connected through the plug to the earth cable of your supply network in accordance with prescribed safety regulations.
If in doubt contact a qualified electrician or the near- est Bosch Service Centre.
fWARNING! Inadequate extension cables can be dangerous. Extension cable, plug and socket must be of watertight construction and intended for outdoor use.
It is recommended for increased electrical safety to use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it.
If the supply cord is damaged, it must be replaced by a Bosch Service Centre.
For products not sold in GB:
WARNING: For your safety, it is required that the plug attached to the machine is connected with the exten- sion cord. The coupling of the extension cord must be protected against splash water, be made of rubber or coated with rubber. The extension cord must be used with a cable strain relief.
The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition.
Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The re- placement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a pos- sible shock hazard and should never be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a residual cur- rent device (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and understanding the operating instructions. Please take note of the symbols and their meaning. The correct in- terpretation of the symbols will help you to use the garden product in a better and safer manner.
Symbol Meaning
Movement direction
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Intended Use
The garden product is intended for domestic lawn mowing.
Technical Data
Lawnmower |
| Rotak 34 | Rotak 37 |
Article number |
| 3 600 H82 0.. | 3 600 H82 1.. |
Rated power input | W | 1300 | 1400 |
Blade width | cm | 34 | 37 |
Height of cut | mm | 20 – 70 | 20 – 70 |
Grassbox, capacity | l | 40 | 40 |
Weight according to | kg | 11.0 | 11.2 |
Protection class |
| /II | /II |
Serial number | see type plate on the garden product | ||
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific coun- tries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Noise/Vibration Information
Measured sound values determined according to 2000/14/EC (1.60 m height, | 3 600 ... | H82 0.. | H82 1.. |
1 m distance away). |
|
|
|
Typically the |
|
|
|
Sound pressure level | dB(A) | 83 | 84 |
Sound power level | dB(A) | 93 | 94 |
Uncertainty K | dB | =1 | =1 |
Wear hearing protection! |
|
|
|
Vibration total values (triax vector sum) determined according to EN 60335: | m/s2 |
|
|
Vibration emission value ah | <2.5 | <2.5 | |
Uncertainty K | m/s2 | =1.5 | =1.5 |
|
| F 016 L70 837 (23.3.11) |
|
| Bosch Power Tools | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
