D8125INV

Installation

3.6.1.6 Programming the FA113 Keyfob

An unlimited number of FA113 Keyfobs can be added to a system in the same location. However, the system is not capable of differentiating the keyfobs. The D8125INV does not supervise Low Battery or Missing conditions for any of the Keyfobs. The FA113 Keyfob is treated as a Maintained Keyswitch on D9412GV2, D7412GV2, D9412G, D7412G, D9412, D7412, D7212, and D9112 Control Panels. When using both arming/disarming and alert functions of the keyfob, Points 74 and 75 (for Zonex Bus 1 on D9412GV2, D7412GV2, D9412G, D7412G, D9412, D7412, D7212, and D9112 Control Panels) and Points 194 and 195 (for Zonex Bus 2 on D9412GV2, D9412G, D9412, and D9112 Control Panels) are used.

Do not program any other transmitters for Points 74 and 75 or Points 194 and 195. These are for the FA113 Keyfobs only.

The FA113 Keyfob has four buttons: ON, OFF, and two Alert (*) buttons. The ON button is used to arm the area the point is assigned to and initiate the Master Arm Delay state. The OFF button is used to disarm the area to which the point is assigned.

The Point Index for Point 74 and 194 must be programmed as a Point Type 4 with a Point Response of 2.

When both Alert buttons are pressed, the D8125INV sends a Short to the control panel for Point 75 or 195. Program the control panel accordingly so that the Point Response provides the appropriate response. To clear the condition from Point 75 or 195, press the ON or OFF button.

To program an FA113 keyfob, connect the programming cable to the transmitter and program the lower numbered point (74 or 194) as a new transmitter and select mode 4. Disconnect the programming cable and program the higher numbered point (75 or 195) into the D8125INV as an existing transmitter and select mode 4. This will enable both points on the keyfob.

3.6.1.7Programming the D9412GV2, D7412GV2, D7212GV2, D9412G, D7412G, D7212G, D9412, D7412, D7212, and D9112 Control Panels for RF Transmitters

Regardless of the mode that is programmed into each transmitter (Normally Open, Normally Closed), the D8125INV will send back to the control panel the responses shown in Table 8.

2.2 k

= Normal

 

2.2 k

= Normal

 

2.2 k

= Faulted

 

2.2 k

= Faulted

 

 

 

= Normal

 

 

= Normal

2.2 k

= Tamper

= Faulted

2.2 k

= Tamper

= Faulted

 

 

 

 

Modes 1 & 8

Modes 2 & 9

Modes 3, 7 & 10

Modes 4, 6 & 11

If the RF Transmitter sends…

 

D8125INV sends to the control panel…

a Faulted condition

 

Shorted condition

 

 

a Tamper condition

 

Open condition

 

 

a Normal condition

 

Normal condition

 

 

a Low Battery condition (see note)

Low Battery condition

 

Table 8: D8125INV Point Transition Reporting to D9412, D9112, D7412, and D7212 Control Panels

Note: Only D9412G, D7412G, D7212G, D9412, D7412, D7212, and D9112 Control Panels, Version 6.50 and higher, are able to send RF BATTERY LOW events. See the D9412G/D7412G Program Entry Guide (P/N: 47775) for information on programming RF BATTERY LOW events in the Routing section. The D9412GV2, D7412GV2, and D7212GV2 can use any revision. In addition, RPS Version 3.6 and 9000MAIN Handler Version 1.13 or higher must be used to enable this event.

Based on the information in Table 8, please follow the recommended programming guidelines for Point Type and Point Response shown in Table 9.

D8125INV Operation and Installation Guide

49690E

Page 22

© 2005 Bosch Security Systems

Page 22
Image 22
Bosch Appliances D8125INV manual Programming the FA113 Keyfob

D8125INV specifications

The Bosch Appliances D8125INV is a remarkable addition to the world of high-end kitchen technology, designed to deliver exceptional performance and unparalleled convenience for modern households. This innovative appliance boasts a range of features that cater to the needs of discerning chefs and anyone who appreciates quality in their kitchen equipment.

One of the standout characteristics of the D8125INV is its sleek, integrated design. The built-in style allows it to blend seamlessly with your cabinetry, providing a streamlined look that enhances any kitchen decor. The ability to customize the front panel to match your cabinetry ensures that this appliance does not disrupt the aesthetic of your kitchen.

In terms of functionality, the D8125INV excels. It features a spacious capacity, offering ample room for cooking a variety of dishes simultaneously. The appliance is equipped with advanced cooking technologies, including a powerful convection system that ensures even heat distribution for perfectly cooked meals every time. This feature significantly reduces cooking times and enhances the quality of food.

The D8125INV also incorporates precision cooking with multiple cooking modes, including traditional bake, broil, and specialized modes like pizza and bread baking. These options cater to various culinary techniques and preferences, allowing users to experiment and explore different cooking styles with ease. The intuitive control panel provides easy access to these functions, ensuring that even novice cooks can achieve professional results.

Another remarkable aspect is the appliance's energy efficiency. With Bosch's commitment to sustainability, the D8125INV has been designed to consume minimal energy without compromising performance. This makes it an environmentally friendly choice for eco-conscious consumers.

Safety is also a priority with this model. It includes features such as a safety lock and an automatic shut-off function to prevent overheating and accidents in the kitchen, providing peace of mind while cooking.

Additionally, the easy-to-clean interior and removable racks make maintenance a breeze, allowing users to focus more on cooking and less on cleanup.

Overall, the Bosch Appliances D8125INV is a perfect blend of style, functionality, and efficiency, making it an ideal investment for those looking to elevate their culinary experience and kitchen design. With its innovative features and commitment to quality, this appliance stands out as a top choice for modern kitchens.