Bosch Appliances FMM-7045 Series manual ADA compliant UL Listed Functions, Alarm Action

Models: FMM-7045 Series

1 2
Download 2 pages 18.76 Kb
Page 1
Image 1
FMM-7045 Series Multiplex Addressable Manual Stations

Fire Alarm Systems FMM-7045 Series Multiplex Addressable Manual Stations

FMM-7045 Series Multiplex Addressable Manual Stations

The FMM-7045 Series Multiplex Manual Stations are UL Listed fire alarm initiating devices that can be connected along with other multiplex devices on the D7039 Multiplex Expansion Module. The D7024 Addressable Fire Alarm Control Panel (FACP) supervises the entire multiplex loop, including the FMM-7045 or FMM-7045-D manual stations, for troubles, alarms, and ground fault conditions. Because each manual station occupies only one address on the multiplex bus, it can be addressed for any point within the 9 to 255 range allowed by the multiplex expansion module.

These manual stations are generally installed near building exits such as stairways and doors, allowing persons evacuating the building to activate the fire alarm. They have optional scored acrylic breakrods and a pull handle that locks in the activated position, to allow easy identification of alarm activation points.

These manual stations are high-quality units constructed entirely of non-toxic materials. They have a low profile and rounded edges to fit most design applications. All components are painted or have plated surfaces to inhibit corrosion. Non-corroding screw terminals are provided for wire connections. They are manufactured in conformance with the standards set forth in the Americans with Disabilities Act (ADA).

Easy addressing with rotary switches

Low current draw

Key-lock reset

Replaceable scored acrylic breakrod option

Terminal connections

ADA compliant

UL Listed

Functions

Alarm Action

The single-action FMM-7045 has a white pull-down lever in its center; while the dual-action FMM-7045-D has a white push lever above the white pull-down lever in its center. Pulling down the pull-down lever latches it into place and sends an alarm signal to the control panel over the multiplex bus. The pull-down lever cannot be reset unless the correct key is inserted into the manual station's lock and the unit opened. The latching lever can then be restored to its normal position.

Certifications and Approvals

Listings and

UL UNIU: Boxes, Non-Coded (UL38)

Approvals:

CSFM: 7150-1615: 122

Complies with:

Americans with Disabilities Act (ADA 4.28.3)

 

National Fire Protection Association (NFPA 72)

www.boschsecurity.com

Page 1
Image 1
Bosch Appliances FMM-7045 Series manual Easy addressing with rotary switches Low current draw Key-lock reset, Alarm Action