Fire Alarm Systems FMM‑325A Series Analog Manual Stations
FMM‑325A Series Analog Manual Stations
The FMM‑325A Series Analog Manual Stations are used in the polling circuit of the Bosch Security Systems, Inc.'s FPA‑1000‑UL, D9024, D8024, and D10024A Fire Alarm Control Panels (FACP). They communicate with the control panel (both power and data) over a two‑wire polling circuit.
The manual station's address on the polling circuit is set by programming an EEPROM microchip. The D5070 Analog Device Programmer is required to set the address.
All commercial buildings use manual stations. These manual stations allow people evacuating a building to initiate an alarm. The FACP identifies the alarm point on the polling circuit and the alarm lever latches in the pulled position.
Certifications and Approvals
Region | Certification |
|
USA | UL | UNIU: Boxes, |
| CSFM | |
| ADA | Complies with Americans with Disabilities |
|
| Act ADA 4.28.3 |
| NFPA | Complies with National Fire Protection As- |
|
| sociation NFPA 72 |
▶Compatible with advanced digital communication protocol
▶Digital data communications and power provided over two-wire circuit
▶EEPROM addressing in module unit
▶Rugged die‑cast housing and corrosion resistant construction
▶Single‑gang mounting
▶Latching alarm lever
▶UL listed for commercial fire applications
▶Meets Americans with Disabilities Act (ADA) requirements
Installation/Configuration Notes
Compatibility Information
The following products are compatible with the FMM‑325A Series Analog Manual Stations:
Category | Product ID | Product Description |
Control Panels: | FPA‑1000‑UL | Compact Fire Panel |
| D8024 | Analog FACP |
| D9024 | Analog FACP |
| D10024A | Analog FACP |
Programmers: | D5070 | Analog device programmer |
Mounting Considerations
The FMM‑325A manual stations are for indoor use only.
The FMM‑325A Series Analog Manual Stations have
www.boschsecurity.com