STEP 3:
PREPARE THE VENTING BLOWER
exhaust
ports
Figure 17
ROOM-VENTED (Recirculating)
INSTALLATION:
1.Remove one blower unit mounting screw and one blower plate screw. Remove the blower plate from cabinet. See Figure 19.
2.Carefully lift the blower unit out of the microwave oven.
3.Rotate blower unit 90˚ so the exhaust ports face the front of the cabinet. See Figure 20.
4.Place blower unit back into microwave oven.
5.Reattach blower plate to microwave oven. Attach with the one blower unit mounting screw and then the one blower plate mounting screw. See Figure 21.
blower unit
Figure 20
blower plate mounting screws
blower unit exhaust ports
blower unit mounting screws
Figure 18
blower unit
blower plate mounting screws
blower unit mounting screws
Figure 19
blower plate mounting screws
blower unit mounting screws
Figure 21
12