Bosch Appliances LTC 8715 instruction manual 4.4.1DIP Switch Settings - LTC 8714 Series, En

LTC 8714 and 8715 Series Instruction Manual Installation EN 8

4.4.1DIP Switch Settings - LTC 8714 Series

S401 DIP Switch: Verify that switches 1, 2, and 3 are ON and all others are OFF.

S402 DIP Switches 1 to 5: Baud rate and poll type settings must match those on the Allegiant Series keyboards. Group number should be selected to agree with capacity and configuration settings associated with specific Allegiant series system being used.

Switch Number				Function
1				Allegiant Keyboard
				Baud Rate
OFF				9600 (Factory Default
				Setting)
ON				19200
2	3	4	5	Group Number
OFF	OFF	OFF	OFF	0	(Kbd 1– 8)
OFF	OFF	OFF	ON	1	(Kbd 9–16)
				(Factory Default
				Setting)
OFF	OFF	ON	OFF	2	(Kbd 17–24)
OFF	OFF	ON	ON	3	(Kbd 25–32)
OFF	ON	OFF	OFF	4	(Kbd 33– 40)
OFF	ON	OFF	ON	5	(Kbd 41– 48)
OFF	ON	ON	OFF	6	(Kbd 49–56)
OFF	ON	ON	ON	7	(Kbd 57– 64)
ON	OFF	OFF	OFF	8	(Kbd 65–72)
ON	OFF	OFF	ON	9	(Kbd 73– 80)
ON	OFF	ON	OFF	10 (Kbd 81– 88)
ON	OFF	ON	ON	11 (Kbd 89–96)
ON	ON	OFF	OFF	12 (Kbd 97–104)
ON	ON	OFF	ON	13 (Kbd 105–112)
ON	ON	ON	OFF	14 (Kbd 113 –120)
ON	ON	ON	ON	Reserved

S402 DIP Switches 6 to 8: These switches determine the data polling format that will be used to communicate with the keyboards. The 4 Poll selection would typically be used only in LTC 8600 Series systems using fixed speed receiver/driver equipped cameras. The 8 Poll selection would typically be used in LTC 8800 and LTC 8900 systems with fixed speed receiver/drivers. The 6 Poll selection should be used in any system where Allegiant Series keyboards are being used to control variable speed AutoDome® Series cameras.

Switch Number
6	7	Poll Type
OFF	OFF	4 POLL
OFF	ON	8 POLL
ON	OFF	6 POLL
		(Factory Default Setting)
ON	ON	Reserved
8		Reserved

4.4.2DIP Switch Settings - LTC 8715 Series

S401 DIP Switch: Verify that switches 1, 2, and 3 are ON and all others are OFF.

S402 DIP Switch: Verify that switches 1, 2, and 3 are ON and all others are OFF if the LTC 8715 will have LTC 8714 units connected directly to it. Verify that switches 1, 2, 3, and 5 are ON and all others are OFF if the LTC 8715 will have other LTC 8715 units connected directly to it (see FIGURE 11).

Bosch Security Systems May 23, 2005