Bosch Appliances LTC 9365/00 Unpacking, Service, Care And Maintenance, Description, Installation

LTC 9365 Series Instruction Manual Unpacking EN 7

1UNPACKING

This electronic equipment should be unpacked and handled carefully.

Check for the following items:

•LTC 9365/00 Housing:

1 Housing Top

1 Housing Bottom

•Hardware Kit:

1 Camera Bracket

2 1/4-20 x 5/8in. Bolts

2 Flat Washers

2 Split-ring Washers

1 1/4-20 x 3/8in. Bolt

1 O-ring

2 10-32 x 1/2in. Security Screws

1 Right Angle BNC Connector

1 Security Tool

•Installation Instructions (This Manual)

If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Bosch Security Systems Inc. Sales Representative or Customer Service.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

2SERVICE

If the unit ever needs repair service, the customer should contact the nearest Bosch Security Systems, Inc. Service Center for return authorization and shipping instructions.

Service Centers

USA

Phone: 800-366-2283 or 717-735-6638 fax: 800-366-1329 or 717-735-6639

CCTV Spare Parts

Phone: 800-894-5215 or 408-956-3853 or 3854 fax: 408-957-3198

e-mail: BoschCCTVparts@ca.slr.com Canada

Phone: 514-738-2434

Europe, Middle East & Asia Pacific Region Phone: 32-1-440-0711

For additional information, see www.boschsecuritysystems.com.

3CARE AND MAINTENANCE

Regularly scheduled maintenance will help prolong the operation life of this unit. Clean the viewing window as needed with a mild, nonabrasive detergent in water and a soft cloth.

4DESCRIPTION

The LTC 9365/00 Wedge Ceiling Housings are smart stylized housings for indoor use. These housings meet customers' demands for an attractive housing that is both cost competitive and easy to install.

5INSTALLATION

This installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes.

1.Carefully remove the unit from the box.

2.Open the housing top by loosening the (2) 10-32 security screws using the security tool provided (Figure 1). Once the screws have been loosened, pull on the top to open completely.

NOTE: In opening the top, it may be helpful to place the security tool in one of the mounting holes and pull up while holding the top.

10-32 Security

Screw

Security

Housing Tool

Top

Figure 1 Opening the Housing Top

3.Position the housing in the desired location. Be sure the location is structurally sound. Mark the four mounting holes (see Figure 2).

Bosch Security Systems 23 July 2004