Bosch Power Tools ROTAK 34 Product Specification, Intended Use, Introduction, Delivered Items

Product Specification

Lawnmower		ROTAK 34	ROTAK 36	ROTAK 40	ROTAK 43
Part number (typ)		3 600 H81 A..	3 600 H81 B..	3 600 H81 C..	3 600 H81 D..
Rated power	[W]	1400	1400	1700	1700
Blade width	[cm]	34	37	40	43
Height of cut	[mm]	20 – 70	20 – 70	20 – 70	20 – 70
Grassbox capacity	[l]	40	40	50	50
Weight (max.)	[kg]	11	11.2	13,2	13,5

Protection class	/ II	/ II
Serial Number	See serial No 13 (rating plate) on machine.

/ II

/ II

Note: Please observe the order number of your machine. The trade names of individual machines can vary.

Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af- fected. If the system impedance of the power supply is lower than 0.36 Ohm, disturbances are unlikely to occur.

Intended Use

This product is intended for domestic lawn mowing.

Introduction

This manual gives instructions on the correct as- sembly and safe use of your machine. It is important that you read these instructions carefully.

When fully assembled the machine weighs approxi- mately between 11 and 13.5 kg. If necessary, obtain assistance to remove from packaging.

Take care when carrying the mower to the lawn, as the blades are sharp.

Delivered Items

Carefully remove the machine from its packaging and check that you have all the following items:

–Lawnmower with handle assembly

–1 Handle bottom

–2 Bolts

–2 Wing nuts

–2 Screws

–2 Grassbox parts (ROTAK 34/36)

–3 Grassbox parts (ROTAK 40/43)

–2 Cable clips

–Cable restraint (if supplied separately)

–Operating instructions

When parts are missing or damaged, please contact your dealer.

Operating Controls

1Switch lever

2Safety button

3Handle top

4Cable restraint**

5Mains plug**

6Grassbox

7Deflector guard

8Handle bottom

9Ventilation slots

10Wheels

11Grass comb

12Height of cut lever

13Serial Number

**Country specific

Not all of the accessories illustrated or described are included as standard delivery.

For Your Safety

Warning! Switch off, remove plug from mains before adjusting, cleaning or if cable is cut, damaged or entangled.

The blades continue to rotate for a few sec- onds after the machine is switched off.

Caution - do not touch rotating blades.

Electrical Safety

Your machine is double insulated for safety and re- quires no earth connection. The operating voltage is 230 V AC, 50 Hz (for non-EU countries 220 V, 240 V as applicable). Only use approved extension cables. Contact your service agent for details.

Extension cords/leads should only be used if they comply with H05VV-F, H05RN-F types or IEC type design (60227 IEC 53, 60245 IEC 57).

F 016 L70 635 • 09.11