13

Canceling a Cycle

Open the dishwasher door far enough to expose
the control panel. The display will show:
· “Close the door”.
· the remaining cycle time.
· the selected cycle.
· the cycle phase.
· “Cancel Program”.
Press the – button. The display will show “To
cancel - close the door”.
Close the dishwasher door.
When the dishwasher has drained, the
dishwasher will emit an end of cycle tone (five
times).
Open the dishwasher door. The display will briefly
show “Clean”. After 5 seconds the dishwasher
will automatically turn off.
Operating the Dishwasher
(continued)

Unloading the Dishwasher

It is recommended to unload the bottom rack first.
Remove and unload the silverware basket(s).
They are easily removed for unloading.
Unload the top rack.
Water Type

Child Safety Latch

Your dishwasher is shipped from the factory with
the Child Safety Latch disengaged and in the
normal operating mode. Pull on the door handle to
open the door. The Child Safety latch activation
lever is located in the recess for the door handle.
You must look up into the recess to find the Child
Safety Latch activation lever (see Figure 19).
To activate the Child Safety Latch insert a
matchstick or other non-metal object into the
opening as shown in Figure 19. The activation
lever will release and move toward the left.
You have now activated the Child Safety Latch.
Each time you open the dishwasher door you will
need to slide the activation lever to the right
to release the door locking mechanism, you can
then pull the door open (See Figure 20). After you
open the door you should release the Child Safety
Latch Activation lever and let it slide back toward
the left.
To deactivate the Child Safety Latch insert a
matchstick or other non-metal object into the
opening as shown in Figure 21. Slide the
activation level to the right and hold. Remove the
matchstick and release the lever. The feature has
now been deactivated and you can open the door
by pulling the handle.
Figure 19
Figure 20
Figure 21
To continue the cycle, shut the dishwasher door.
The dishwasher will start automatically and
continue the selected cycle.