The DLX series dishwashers (SHU 3012 UC and SHU 3016 UC) come with a lower rack that has two sets of flipped down tines. With these models, ff more space is needed for pots and pans, the rear two sets of tines can be folded to the down position. Figure 5 shows the lower basket with the rear sets of tines in the down position to accomodate large pots.
_reS.
Silverware should be mixed when placed in the silverware basket. The purpose of mixing the silverware is to avoid having them nest together, for example if spoons would be placed together they could nest together so that water could not properly circulate across them to clean the surfaces.
Silverware should be placed in the silverware basket with the handles down, with the exception of the knives, which in order to avoid accidentally cutting oneself, should be placed with the handles up.
If you do inadvertently load the silverware basket with the knife blades up it is recommended, to avoid cutting yourself when unloading, that you remove the silverware basket from the dishwasher and tip the contents out onto a cutting board.
RACK HEIGHT ADJUSTMENT
The upper rack height of the The DLX series dishwashers (SHU 3012 UC and SHU 3016 UC) is adjustable. There are two positions, see figure 6:
-1. The upper position is used to provide more room for items to be placed in the lower rack.
2.The lower position is used to provide more room for items to be placed in the upper rack.
To reposition rack:
a.First empty upper rack and pull rack partially out to point where rack can be lifted upward as shown in upper illustration of Figure 6.
b.Pull the rack forward and then up until rollers are completely free of channels.
,c. Reinsen the rack with the other set of milers on the channel.
Figure 6.
Extra Tall Items
If you have extra tall items that cannot fit in the lower rack without interfering with the upper spray arm or without hitting the upper rack, the upper rack may be removed. A special "Extra Tall Item Sprinkler" is provided with the dishwasher to allow use of the dishwasher with upper rack removed. See figure 7.
_re7.
To allow washing of exUa tall items:
1.With upper rack empty, remove it from the dishwasher by pulling the rack partially out to the point where
rack can be lifted upward and out to disengage the wheels from side rails.
7
