WARNING

1.Flammable materials, gasoline, pressurized containers, or any other items or articles that are potentially fire hazards must never be placed on or adjacent to the heater. The appliance area must be kept free of all combustible materials, gasoline and other flammable vapors and liquids.

2.Do not obstruct the flow of combustion and ventilation air to the appliance.

CLEARANCES

This heather is designed certified for installation on a combustible wall, in an alcove with minimum clearances to combustible construction of 51mm (2 inches) from sides, 305mm (12 inches) from top and bottom. A minimum of 305mm (12 inches) shall be allowed for maintenance of serviceable parts. Clearance from vent is dependent upon the clearance rating of the venting material used; that is type B-1 vent is approved for 1 inch clearance, B-2 vent for 2 inch, etc.

MOUNTING

The W125K…is designed certified for mounting to a wall. The heather must not be installed directly on a carpeted wall.

The heather must be mounted to the wall using appropriate anchoring materials, through the four holes provided.

Expansion and contraction of piping due to changing water temperature in pipes imparts movement to heater which, if mounted directly to a brittle, board such as plasterboard can cause failure of mounting.

Heater must be mounted level to assure proper operation.

VENTING

The BOSCH model W125K… instantaneous gas water heater has a built-in a draft diverter is designed for indoor installation only. The draft diverter outlet must be connected to a clear, unobstructed vent of the same size or larger, refer to:

-In Canada, CAN 1-B149 Installation Code for detailed requirements

-In U.S., ANZI Z223.I/NFPA 54 National Fuel Gas Code for detailed requirements

-The minimum length of a vertical vent up to the terminal must be 2 ½ feet.

WATER CONNECTIONS

The W125K comes supplied with a ½’’ NPT cold water inlet adapter and a flexible wire braid hot water outlet with a ½’’ NPT connection.

G772_179

Figure 2

RELIEF VALVE

The listed pressure relief valve supplied must be installed near the hot water outlet at time of installation of the heater. No valve is to be placed between the relief valve and the heater. A drain line must be connected to the relief valve to direct discharge to a safe location. Do not install reducing coupling or any other restriction in the discharge line. The discharge line must be installed so as to allow complete

drainage of both the valve and the line.

GAS CONNECTIONS

Before connecting the gas supply to the heater check heater’s model/rating plate to make sure that gas on which heater is to operate is the same as specified on the model/ rating plate.

The W125K…instantaneous gas water heater is supplied with a gas pipe, a gas pressure regulator and a manual gas cock that must be installed on the heater before attaching the gas supply line, see figure 3. Failure to install gas pipe, the main manual gas valve and the pressure regulator, or the failure to install them in the sequence show in figure 3 will be in violation of the A.G.A. and C.G.A. certification of the unit and can cause damage to heat changer.

BOSCH water heaters are shipped from the factory with the gas pressure regulators preset for the gas shown on the rating plate to the correct pressure.

-In Canada, for high altitude operation;

-In U.S., for standard altitude operation unless specially

marked as a high altitude unit.

4

Page 4
Image 4
Bosch Appliances W 125...T1, W125K manual Clearances, Mounting, Venting, Water Connections, Relief Valve, GAS Connections

W 125...T1, W125K specifications

Bosch Appliances has long been synonymous with innovation, quality, and reliability, and the Bosch W125K/W125...T1 models are no exception. These appliances are thoughtfully designed to enhance user experience while providing advanced functionalities that cater to modern household needs.

One of the standout features of the Bosch W125K/W125...T1 is its energy efficiency. These models boast impressive energy ratings that help reduce electricity consumption, making them an eco-friendly choice for environmentally conscious consumers. With advanced inverter technology, the appliances ensure optimal energy use without compromising performance, which not only benefits the environment but also lowers utility bills.

The W125K/W125...T1 series incorporates innovative cleaning technologies, including intelligent sensors that detect load size and soil level. This ensures that each cycle is perfectly adjusted for maximum cleaning power while minimizing resource usage. The auto-dosing feature is another highlight, allowing users to fill detergent and fabric softener in one go, ensuring the right amount is used every time.

The user interface has been designed with simplicity in mind. A sleek, intuitive control panel with clear displays makes it easy for users to select from a variety of wash programs, temperature settings, and drying options. The addition of a smartphone app allows users to control and monitor their appliances remotely, which adds a new level of convenience for busy households.

Noise reduction is another priority in the design of the Bosch W125K/W125...T1. These appliances are engineered with special sound insulation materials and advanced motor technologies that significantly reduce operating noise, making them an ideal choice for open-plan living spaces or homes where quiet is essential.

Finally, Bosch includes robust safety features, such as child locks and overflow protection, to ensure peace of mind during operation. The stainless-steel finish not only contributes to the appliance's modern aesthetic but also enhances durability, promising years of reliable service.

In summary, the Bosch W125K/W125...T1 series combines energy efficiency, intelligent cleaning technologies, user-friendly interfaces, quiet operation, and robust safety features. These appliances exemplify Bosch's commitment to providing high-quality, innovative solutions for contemporary living, making them an excellent addition to any modern home.