Failure Codes and Troubleshooting
Your dishwasher control panel is equipped with a diagnostic display to help in the event of a problem with the appliance.
|
| Error Code |
| Error description | Advice |
|
|
|
| ||
Intensive | Normal | Eco | Quick | Prewash |
|
Inadequate water
supply
Continual fill error
The waste water in the machine cannot be discharged.
Heater error
Alarm is active against
water overflow
Faulty electronic card
Overheating error (temperature in the machine is too high)
Make sure the water inlet tap is
fully open
Close the water tap, separate the water inlet hose from the tap and clean the filter
Restart your machine, contact CDA service if the error resumes
Close the tap and contact
CDA service
Drain hose is blocked
The filters of your machine
might be blocked
Restart the dishwasher and
cancel the programme
If the error continues, contact
CDA service
Contact CDA service
Turn off the dishwasher and disconnect the water supply Contact CDA service
Contact CDA service
Contact CDA service
Faulty heater sensor | Contact CDA service |
