EN 10

Quick Installation Guide VideoJet X10/X20/X40

 

 

7. Configure the IP Address

Install the program Configuration Manager from the CD-ROM provided. If the CD-ROM does not start automatically doubleclick the index.htm file.

Start the Configuration Manager when installation is completed. The network is scanned for compatible devices automatically.

When a VideoJet X is listed, click the entry and click the tab Network, located in the right frame.

Enter the desired IP address (e.g. 192.168.0.40) in the Unit IP address field and click the but- ton Set at the bottom on the right. The new IP address is valid after a reboot of the unit.

Bosch Security Systems 2006-12 V2.5