BM 1619929800
If the red indicator light is “ON”, the battery pack is too hot or cold for
will automatically switch to
If the red indicator light is “BLINKING”, the battery pack cannot accept a charge or the
contacts of the charger or battery pack are contaminated. Clean the contacts of the charger or battery pack only as directed in these operating instructions or those supplied with your tool or battery pack.
CHARGING BATTERY PACK (BC830 1 HOUR CHARGER)
Plug charger cord into your standard power outlet, then insert battery pack into charger (Fig. 12).
The charger’s green indicator light will begin to “BLINK”. This indicates that the battery is receiving a fast charge.
When the unit beeps and the indicator light stops “BLINKING” (and becomes a steady green light) fast charging is complete.
The battery pack may be used even though the light may still be blinking. The light may require more time to stop blinking depending on temperature. When you begin the charging process of the battery pack, a steady red light
could also mean the battery pack is too hot or too cold.
The purpose of the green light is to indicate that the battery pack is
When needed, the internal fan of the charger will turn on to aid the charging process and speed.
When charging several batteries in sequence, the charge time may slightly increase.
When the battery pack is fully charged, unplug the charger (unless you're charging another battery pack) and slip the battery pack back into the tool.
FIG. 12
