BM 2610034438
TYPICAL APPLICATION |
|
1. Keep the blade off the workpiece until the |
|
motor has reached full speed. |
|
FIG. 5 | |
2. Start cutting on a surface where the |
|
greatest number of teeth will be in contact |
|
with the workpiece at one time (Fig. 5). |
|
3.Place the material guide against the workpiece and lower the moving saw blade into the cut.
4.Do not apply pressure when cutting. The weight of the tool will supply adequate
pressure for the fastest cutting. | CORRECT | INCORRECT |
5.When completing a cut, hold the tool firmly so it will not fall against the workpiece.
INSERTING AND RELEASING BATTERY PACK
Your tool is equipped with a secondary locking latch to prevent the battery pack from completely falling out of the handle, should it become loose due to vibration.
To remove the battery pack, press the battery pack release button and slide the battery pack forward.
Press the battery pack release button again and slide the battery pack completely out of tool housing (Fig. 1).
