Bosch Power Tools FL11A manual Assembly, Operating Instructions, cleaning or servicing

Models: FL11A

1 20
Download 20 pages 41.01 Kb
Page 5
Image 5
Assembly

BM 2610022017 04-12_BM 2610022017 04-12.qxp 4/17/12 12:45 PM Page 5

 

 

Assembly

 

 

To reduce the risk of electric shock, disconnect battery pack before

 

! WARNING

 

 

cleaning or servicing.

 

 

INSERTING AND RELEASING

BATTERY PACK

To insert battery, align battery and slide battery pack into tool until it locks into position. Do not force.

Release battery pack from tool by pressing on both sides of the battery release tabs and pull downward (Fig. 1).

Operating Instructions

PROTECTION AGAINST DEEP

DISCHARGING

The lithium ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the cordless worklight is switched off by means of a protective circuit.

TURNING THE WORKLIGHT ON

1.To turn the Flashlight "ON", press the On/Off switch. To turn Flashlight "OFF", press the On/Off switch (Fig. 1).

Do not continue to press the ! CAUTION On/Off switch after the

cordless worklight has been automatically switched off. The battery can be damaged.

IMPORTANT CHARGING NOTES

1.The charger was designed to fast charge the battery only when the battery temperature is between 32˚F (0˚C) and 113˚F (45˚C). If the battery pack is too hot or too cold, the charger will not fast charge the battery. (This may happen if the battery pack is hot from heavy use). When the battery temperature returns to between 32˚F (0˚C) and 113˚F (45˚C), the charger will automatically begin charging.

2.A substantial drop in operating time per charge may mean that the battery pack is nearing the end of its life and should be replaced.

3.Remember to unplug charger during storage period.

4.If battery does not charge properly:

a.Check for voltage at outlet by plugging in some other electrical device.

b.Check to see if outlet is connected to a light switch which turns power “off” when lights are turned off.

c.Check battery pack terminals for dirt. Clean with cotton swab and alcohol if necessary.

d.If you still do not get proper charging, take or send tool, battery pack and charger to your local Bosch Service Center. See “Tools, Electric” in the Yellow Pages for names and addresses.

Note: Use of chargers or battery packs not sold by Bosch will void the warranty.

CHARGER INDICATORS, SYMBOLS

AND MEANING

If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet.

If the green indicator light is “ON”, the charger is plugged in but the battery pack is not

inserted, or the battery pack is fully charged and is being trickle charged.

If the green indicator light is “BLINKING”, the battery pack is being fast-charged. Fast-

charging will automatically stop when the battery pack is fully charged.

-5-

Page 5
Image 5
Bosch Power Tools FL11A Assembly, Operating Instructions, cleaning or servicing, Inserting And Releasing Battery Pack