![](/images/new-backgrounds/1314358/31435827x1.webp)
BM 2610957377
Troubleshooting
PROBLEM | SYMPTOMS | RESOLUTION |
Nailer operates, but no | • Check for a jam. | • Clear a jam. |
nail is driven. | • Check function of nail follower. | • Clean and lubricate. |
| • Follower spring weakened or damaged? | • Replace follower spring. |
| • Check for proper nails. | • Use only recommended nails. |
| • Verify tool is loaded. | • Reload tool. |
|
|
|
Nail driving action seems | • Check air pressure is in operational range. | • Increase air pressure (Do not exceed 120 psi). |
slow or weak. | • Driver blade worn? | • Use pneumatic tool lubricant. |
| • Piston | • Contact Bosch for replacement or repair. |
| • Bumper worn? | • Replace Bumper. |
| • Check recommend hose diameter and length. | • Follow recommendations. |
|
| • Check hose for kinks. |
|
|
|
Tool drives nails too | • Check air pressure. | • Reduce air pressure. Min. Operational |
deep. | • Check Depth of Drive. | pressure 60 psi. |
| • Check bumper wear. | • Use “Depth of Drive Adjustment”. |
|
| • Replace bumper. |
|
|
|
Tool drives nails too | • Check air pressure. | • Increase air pressure. Max. Operational |
shallow. | • Check Depth of Drive. | pressure 120 psi. |
| • Check recommend hose diameter and length. | • Use “Depth of Drive Adjustment”. |
|
| • Follow recommendations. |
|
| • Check hose for kinks. |
|
|
|
Tool skips nails or has | • Check for proper nails. | • Use only recommended nails. |
intermittent feed. | • Check function of magazine per page 7. | • Clean and lubricate. |
| • Follower spring weakened or damaged? | • Replace follower spring. |
| • Piston | • Contact Bosch for replacement. |
|
|
|
Nails jam frequently. | • Check for proper nails. | • Use only recommended. |
|
|
|
Driven nails are bent. | • Driver blade worn? | • Contact Bosch for replacement. |
|
|
|
Nails driven properly | • Check inside diameter of air hose. | • Use correct air hose. |
during normal operation, | • Check suitability of compressor. | • Use correctly sized compressor for number of |
but does not drive fully at |
| tools used and work rate. |
faster nailing speeds. |
|
|
|
|
|
14.