System Setup
Step 1: Set up the remote control
A.Slide the battery compartment cover off the back of the remote control.
AA (IEC LR6) batteries (4)
Battery compartment cover
B.Install four AA (IEC LR6) batteries, matching the polarity markings (+ and
C.Slide the battery cover back into place.
Step 2: Turn your system on
A.Press the power button on the control console to turn on your system.
Because the system is in a low power state when in standby, it takes several seconds to start. When the status indicator on the control console changes from blinking to steady green, your system is ready to use.
Status indicator
Power button
16 - English