|
|
| Reference |
| |
|
|
|
|
|
|
|
|
|
| ||
| Problem | What to do |
| ||
|
|
|
| ||
| FM sound is distorted | • Adjust antenna position to reduce interference. |
| ||
|
|
|
| ||
| FM sound is noisy in sur- | • Weak FM stations will produce static in the surround speakers. Select the |
| ||
| round mode | mode to minimize noise. |
| ||
|
|
|
| ||
| Sound is distorted | • Make sure speaker cables are not damaged and the connections are secure. |
| ||
|
| • Reduce the output level from any external components connected to the media center. |
| ||
|
|
|
| ||
| No tape, CD, VCR, or TV | • Check the connections. |
| ||
| sound. | • Make sure the component is turned on. |
| ||
|
| • Refer to the component owner’s manual. |
| ||
|
|
|
| ||
| You forgot your password | • Enter a password of 2673 to access the parental controls and then create a |
| ||
|
| new password. |
| ||
|
|
|
| ||
| Media center display says: | • Make sure the audio input cable is firmly seated in the media center |
| ||
| NOT CONNECTED | SPEAKER ZONE 1 jack. |
| ||
|
|
|
| ||
| LIFESTYLE® remote does | • Make sure correct codes are set. See “Programming your LIFESTYLE® remote to control |
| ||
| not control your TV, VCR, | your TV” on page 19. |
| ||
| cable/satellite box, or | • Make sure that the front of the media center is not obstructed. The IR emitters that send |
| ||
| other external component. | commands to your external components are behind the front panel display. |
| ||
|
|
| |||
|
| • If you still cannot control your external components successfully, you may need to con- |
| ||
|
| nect the external IR emitter, included with your system, to the IR EMITTER jack on the |
| ||
|
| rear panel of the media center. See “Connecting the optional IR emitter cable” in your |
| ||
|
| LIFESTYLE® Installation Guide. |
| ||
|
|
|
| ||
| Your TV turns on and off | • Reposition the TV on/off detector on the back of your TV. |
| ||
| unexpectedly. | • Verify that the TV on/off detector is working properly by choosing | TV Status | in the |
|
|
| Settings (TV) menu. When you turn on your TV, the status line that reads, “Detected TV |
| ||
|
| Power: Off” should change to “Detected TV Power: On”. |
| ||
|
|
|
|
|
|
English
43
