Setting Up

Check the connections

Check to be sure all connections are made positive to positive (+ to +) and negative to negative (– to –) (Figure 4). Make sure that no loose strands of wire touch across terminals. Bridged wires can short circuit and damage the amplifier. Tighten any loose connections before you plug in the receiver and turn it on.

Back of RIGHT speaker

 

 

Back of LEFT speaker

-+

 

 

+-

–

+

+

–

 

Back of receiver

 

Figure 4

Completed connections

Test the speakers

To make sure your speakers operate correctly:

1.Place the speakers less than 6 inches (15 cm) apart, facing each other.

2.Turn on your receiver. Set the receiver to MONO (monophonic), if that is an option on your receiver.

3.Make sure that all special effects (such as surround sound) are turned off.

4.Set the balance control to normal (center position).

5.Play some deep bass passages of music through the speaker.

The sound should seem to come from a point between the two speakers. The bass should be full and natural. If it is not, one of the connections may be reversed, causing the speakers to play out of phase (refer to “Make the connections” on page 6).

To correct the problem, make sure all the wires are connected positive to positive (+ to +) and negative to negative (– to –). Then repeat steps 1 through 5 above to re-test

the speakers.

AM181869_04_V.pdf

October 30, 2001

7

Page 6 Page 8
Page 7
Image 7
Bose 301 Series manual Check the connections, Test the speakers
Page 6 Page 8

301 Series specifications

The Bose 301 Series speakers have earned a distinguished reputation in the realm of home audio systems, known for their blend of sophisticated design and impressive sound performance. These speakers embody Bose’s commitment to innovation and quality, making them a popular choice for audiophiles and casual listeners alike.

One of the standout features of the Bose 301 Series is its unique Direct/Reflecting speaker technology. This design disperses sound throughout the room, creating a more immersive listening experience. Unlike conventional speakers that primarily direct sound forward, the Bose 301 utilizes a combination of direct and reflected audio waves. This results in a broader soundstage and enhances the overall depth of sound, making it feel as though the listener is at the center of the performance.

Additionally, the Bose 301 Series incorporates dual 5.25-inch full-range drivers that provide rich and balanced audio across a wide range of frequencies. The speakers are engineered to deliver powerful bass performance without compromising clarity in mid and high frequencies. This balance allows listeners to experience music and movies with a richness that is typically found in much larger speaker systems.

The enclosure design of the Bose 301 is also noteworthy. The speakers feature a sleek, compact design that allows them to seamlessly blend into various home décor styles. Moreover, their built-in bass reflex port enhances low-frequency response, providing a more rounded sound profile. This design reduces distortion and helps to maintain clear sound at higher volumes.

Another important characteristic of the Bose 301 Series is their versatility. They can be used in a variety of setups whether as stereo speakers for a music system or as part of a surround sound setup for home theater. Their capability to handle a wide range of power inputs ensures that they can perform well with different amplifiers and receivers, making them an adaptable choice for diverse listening environments.

In summary, the Bose 301 Series speakers are characterized by their Direct/Reflecting technology, robust driver configuration, and aesthetically pleasing design. Their exceptional audio quality and versatility make them a smart investment for anyone looking to enhance their listening experience at home. Whether enjoying your favorite music or watching a cinematic masterpiece, the Bose 301 Series promises to deliver an engaging audio experience that captures every nuance and emotion.
Top Page Image Contents