Setting Up Your Acoustimass® 3 Speaker System
4.Connect the free end of the left (L) INPUTS cable to the LEFT speaker terminals of your amplifier or receiver. Connect the marked wire to the positive (+) terminal and the plain wire to the negative
5.Connect the free end of the right (R) INPUTS cable to the RIGHT speaker terminals of your amplifier or receiver. Connect the marked wire to the positive (+) terminal and the plain wire to the negative
CAUTION: Before you plug in your receiver or amplifier, make sure that no strands of wire from any terminal are brushing against any other terminal. Such “bridged” wires create short circuits which can damage your receiver or amplifier.
Figure 4
Completed connections
– | R | + |
OUTPUTS TO CUBE SPEAKERS
– | L | + |
– | R | + |
INPUTS FROM AMP OR RECEIVER
– | L | + |
Checking your connections
To avoid damaging your speakers, check all connections and correct any problems before plugging in and turning on the amplifier or receiver. Make sure the cube speakers are con- nected to the module and not directly to the amplifier or receiver.
AM252171_02_V.pdf | October 22, 2001 | 7 |
