Setting Up
Connect the power cord
1.Plug the small end of the power cord into the power jack on the back of your radio (see Figure 3). Line up the flat edge of the plug with the flat edge on the side of the jack.
Figure 3
Connecting the power cord.
R L
AUX IN
120V~ AC 50/60Hz 50W
VARIABLE OUT 
2.The FM antenna is built into the power cord. To improve FM reception, unwind the power cord completely.
3.Plug the other end of the power cord into an electric outlet.
4.The display panel lights and the time display begins flashing after the power is connected. Press the CLOCK SET button once to stop the flashing.
6 | January 4, 2002 | AM189930_01_V.pdf |
