Bose AM193147_03_V manual Turning the system on and choosing the CD player, CD operations, Press

Operating Your Lifestyle® 30 System

Turning the system on and choosing the CD player

Press the CD key on the remote or press SOURCE SELECT on the music center until CD is selected. If the system is already on, use one of these keys to select the CD player. The CD indicator on the display lights. If a CD has been loaded, it begins to play.

Note: Selecting CD turns the system on in STEREO (2-speaker) mode. Press SURROUND (5-speaker) or STEREO+CENTER (3-speaker) to change the mode.

CD operations

If you want to

Play or resume play of a CD Pause a CD

Stop a CD

Go to next track

Go to beginning of current track Go to previous track

Play another disc

Scan a CD

Randomly play tracks on all discs Randomly play tracks on one disc

Cancel random play

Press

PLAY, or / II PLAY/PAUSE

PAUSE, or / II PLAY/PAUSE

■STOP, or select another source SKIP (forward)

SKIP (reverse) after 4 seconds of track play

SKIP within the first four seconds of the track After four seconds, press SKIP twice to go to the previous track. In RANDOM mode, skips to previous track played.

NEXT DISC

In PLAY mode, selects discs in order, 1 through 6, then back to 1; in RANDOM mode, randomly selects another disc. The music center skips empty disc slots.

Press and hold SKIP or , or TUNE or

RANDOM, or SKIP plus (on the music center)

RANDOM, or SKIP plus (on the music center), a second time

RANDOM, or SKIP plus (on the music center), a third time; press ■ STOP; or select another source

Figure 26

Display of CD playing in zone 1:

Disc 3, track 8, 2 minutes and 45 seconds played, 6 CDs are loaded, and random play for all discs is selected

Note: To prevent excessive wear on the CD mechanism, unattended CD play or random play operations change to STOP after 24 hours. If you want to leave the music center playing unattended for longer than 24 hours, you can use the radio.

The music center display provides the following information about the CD changer functions (see sample display in Figure 26):

•Which CD is playing, paused, or stopped, or NONE if no disc is installed

•How much time the current CD has played

•Which track is playing

•If RANDOM ALL DISCS or RANDOM (one disc) is selected

•Which slots have been scanned and have discs loaded

-Numbers in boxes represent discs in slots.

-Empty boxes indicate disc slots that have not yet been scanned by the music center.

-Blank spaces indicate empty slots (or discs that cannot be loaded).

-A flashing box indicates the disc is upside down or cannot be read.

AM193147_03_V.pdf December 20, 2001 19