Bose Multi-CD Changer Listening to an External Audio Source Connecting an external audio source, Playing a connected audio source

Français Español English

Listening to an External Audio Source

The Wave® music system Multi-CD Changer provides two rear panel inputs (AUX 1 and AUX

2) for external audio devices such as TV, VCR, DVD player, cassette player, or MP3 player.

This gives you the advantage of hearing Wave® music system sound from a range of sources.

To connect a device, you will need a stereo RCA cable. Connect one end of the cable to the

audio output jacks of the source and the other end to one of the AUX inputs on the changer.

Be sure to match the red and white plugs on the cable to the red (R) and white (L) AUX jacks

on the changer.

Use only a stereo connection. You will not hear the connected

device if just the left (L) or right (R) channel is connected.

Red

Connection example: a TV connected to the Multi-CD Changer

To listen to a connected source:

1. Turn on the external device.

2. Press AUX on the Wave® music system remote control. Press AUX again to switch

between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the display to confirm

your selection.

3. Adjust the volume using the Wave® music system remote control.

Note: The Wave® music system remote control cannot turn a connected AUX device on or off, or

change its settings or selections.

Note: Neither AUX 1 or AUX 2 can be selected as an alarm source.