Reference
Troubleshooting
Problem | What to do | ||||||
|
|
|
|
|
|
|
|
Your iPod does not dock | • Make sure the dock insert is the proper fit for your iPod | ||||||
properly | (refer to “Getting it ready” on page 6). | ||||||
|
|
|
|
|
|
| • Remove your iPod from the dock and check for obstructions on the connectors in |
|
|
|
|
|
|
| the dock and on your iPod. Then reseat it in the dock. |
|
|
|
|
|
|
|
|
No sound | • Make sure the system is plugged in, your iPod is turned on, and a music track is | ||||||
|
|
|
|
|
|
| selected and playing. |
|
|
|
|
|
|
| • Press the Play/Pause button on the remote control. |
|
|
|
|
|
|
| • Increase the volume setting for the system. |
|
|
|
|
|
|
| • Remove your iPod from the dock, wait briefly, then reseat it. You may need |
|
|
|
|
|
|
| to do this a few times. |
|
|
|
|
|
|
| • Make sure your iPod is running compatible software |
|
|
|
|
|
|
| (refer to “To check for iPod compatibility” on page 7). |
|
|
|
|
|
|
|
|
No sound and your iPod | • Make sure the power cable is securely plugged in to a functioning wall outet | ||||||
is not charging | and with the symbol on the small connector matched to the one on the back | ||||||
|
|
|
|
|
|
| of the SoundDockTM system. Refer to Figure 4 on page 7. |
|
|
|
|
|
|
| • Make sure your iPod is firmly seated in the dock. |
|
|
|
|
|
|
|
|
No sound after quickly | • Remove your iPod from the dock, wait for 5 seconds, and return it to the dock. | ||||||
undocking or docking | • Unplug the power cable for 1 minute, then plug it back in. This resets the system. | ||||||
your iPod |
| ||||||
|
|
|
|
|
|
|
|
Your iPod does not respond | • Remove your iPod from the dock, wait briefly, then reseat it. You may need to do this | ||||||
to the SoundDock remote | a few times. | ||||||
control buttons shown: | • Try the remote from a different location. If it works there, strong lighting or other | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| room conditions may be causing the problem. |
|
|
|
|
|
|
| • Make sure nothing blocks the infrared (IR) signal path from the remote to your |
|
|
|
|
|
|
| SoundDock system. Wipe off the small red lens on the front end of the remote. |
|
|
|
|
|
|
| • Check the remote control battery to make sure the + side is up as shown |
|
|
|
|
|
|
| in Figure 5 on page 9. |
|
|
|
|
|
|
| • Replace the remote control battery. |
|
|
|
|
|
|
| • Upgrade software on your iPod. For details, refer to “To check for iPod compatibil- |
|
|
|
|
|
|
| ity” on page 7. |
|
|
|
|
|
|
|
|
Your SoundDock system | • Unplug the power cable for 1 minute, then plug it back in. This resets the system. | ||||||
does not respond to its | • Contact Bose® Customer Service about the problem. | ||||||
remote commands or to the |
| ||||||
+ and – volume buttons on |
| ||||||
the front of the system |
| ||||||
|
|
|
|
|
|
|
|
10
