Boss Audio Systems Boss RV-5 owner manual Check Indicator, OUTPUT-A Mono Jack OUTPUT-B Jack

Panel Description

2. CHECK Indicator

This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator. The indicator lights when an effect is ON.

*If this indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately. For instructions on changing the battery, refer to “Changing the Battery” (p. 12).

*The CHECK indicator shows whether the effect is being applied or not. It does not indicate whether the power to the device is on or not.

3. OUTPUT-A (MONO) Jack OUTPUT-B Jack

The output jacks are used to connect the unit to an amplifier or another effects unit.

4. INPUT-A (MONO) Jack INPUT-B Jack

These jacks accept input signals (coming from a guitar, some other musical instru- ment, or another effects unit).

*The unit’s functions differ according to how it is connected. Refer to “Outputting Only the Effect” (p. 11).

*When running the unit on battery power, the INPUT-A (MONO) and INPUT-B jacks double as power switches. Power to the unit is turned on when you plug into the INPUT-A (MONO) or INPUT-B jack; the power is turned off when the cable is unplugged. Be sure to disconnect any cord plugged into the INPUT-A (MONO) or INPUT-B jack when not using this effects device. When the AC adaptor is used, the power remains on at all times, and this function is disabled.

5