1. DIN front-mount (method A)

Installation opening

This unit can be installed in any dashboard opening with dimensions as shown below:

Installing the unit

Be sure to test all connections first, then follow these steps to install the unit.

1.Make sure the ignition is turned off. Dis- connect the cable from the vehicle battery negative (-) terminal.

2.Disconnect the wire harness and the antenna.

3.Press the RELEASE () on the front panel and remove the control panel (for details, refer to ‘Using the Detachable Front Panel’).

4.Lift the top of the outer trim ring. Then pull it out to remove it.

5.The two supplied keys release tabs inside the unit’s sleeve so you can remove it. Insert the keys as far as they will go (with the notches facing up) into the appropriate slots at the center of the left and right sides of the unit. Then slide the sleeve off the back of the unit.

6.Mount the sleeve by inserting it into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine the opening to determine which tabs will be most effective. Bend open the appropriate tabs behind the dashboard to secure the sleeve in place.

7.Reconnect the wire harness and the an- tenna, being careful not to pinch any wires or cables.

8.Slide the unit into the sleeve until it locks into place.

9.To further secure the unit, use the sup- plied metal strap to secure the back of the unit in place. Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to attach one end of the strap to the mounting bolt on the back of the unit. If necessary, bend the metal strap to fit your vehicle’s mounting surface. Then use the supplied hardware (Tapping Screw (5x25mm) and Plain Washer) to attach the other end of the metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical ground- ing of the unit.

10.Reconnect the cable to the vehicle battery’s negative (-) terminal. Then replace the outer trim ring and install the unit’s front panel (see the steps of ‘to install the front panel’).

Removing the unit

1. Make sure the ignition is turned off, and

BV7300 User’s Manual - page 4

Page 4 Page 6
Page 5
Image 5
Boss Audio Systems BV7300 manual DIN front-mount method a Installation opening, Installing the unit, Removing the unit
Page 4 Page 6

BV7300 specifications

The Boss Audio Systems BV7300 is an impressive multimedia car stereo designed to enhance your driving experience with its array of features and advanced technologies. This double din unit not only supports a wide variety of media formats but also integrates seamlessly with today's digital lifestyle.

One of the standout features of the BV7300 is its large 7-inch LCD touchscreen display, which delivers crisp and vibrant visuals. The touchscreen interface is user-friendly, allowing for easy navigation through your music library, settings, and other functions. The display also includes a customizable illumination feature, which enables you to match the stereo's lighting with the ambiance of your vehicle’s interior.

For audio playback, the BV7300 supports multiple formats including MP3, WMA, and WAV, allowing you to enjoy your favorite tracks without limitations. The unit is designed to work with USB flash drives and SD cards, making it easy to access your entire music collection. Additionally, the Bluetooth technology built into the BV7300 allows for hands-free calling and wireless audio streaming, enhancing both convenience and safety while driving.

An important aspect of the BV7300 is its compatibility with various smartphone platforms. The stereo supports both Apple CarPlay and Android Auto, enabling users to connect their smartphones to access navigation apps, music streaming services, and more. This feature elevates your driving experience, allowing for hands-free control of your devices directly from the stereo.

The BV7300 also boasts a built-in AM/FM radio tuner with 30 programmable stations, giving you access to your favorite radio shows and music. The unit is equipped with an equalizer and preset audio settings, letting you customize the sound to your liking.

In terms of connectivity, the BV7300 provides rear view camera input which enhances safety by allowing drivers to see what's behind them while reversing. The unit also supports a range of auxiliary inputs making it easy to connect other devices.

In summary, the Boss Audio Systems BV7300 is a feature-rich multimedia car stereo that combines functionality with advanced technology. With its large touchscreen, Bluetooth capabilities, smartphone integration, and customizable audio settings, it offers a complete solution for those looking to elevate their in-car entertainment experience. Its user-friendly design and compatibility with various media formats make it a versatile addition to any vehicle.
Top Page Image Contents