Features
Your new CHAOS EXXTREME amplifier features the following:
•Class
•Bridgeable outputs
(except CX1100M and CX2000M)
•
(except CX1100M and CX2000M)
•MOSFET PWM (Pulse Width Modulated) Power Supply
•2 Ohm stable stereo operation with output power increase
•Thermal and speaker short protection
•Soft
•Remote
•Variable input gain control
•Variable low pass crossover(s)
•Fixed high pass crossover(s)
•Variable 0 to +18dB Bass Boost
•
•LED power and protection indicators
•Silver anodized heatsink
•Remote subwoofer level control
About 2 Ohm operation
Your CHAOS EXXTREME amplifier has been designed to operate efficiently at loads down to 2 Ohms. This means that you can install four 8 Ohm speakers per channel, when using parallel wiring.
Increasing the number of woofers per channel at low frequencies (below 100Hz) produces an acoustic coupling effect. This acoustic coupling effect increases your power output by about 3dB per speaker, or the equivalent of an additional 10W per speaker.
When operating at 2 Ohms, the amplifiers will increase their output power by approximately 50%. The current draw will also increase by about the same amount, so be sure you have enough current to run the amplifiers into a 2 Ohm load.
If you lack adequate current, your music reproduction will be distorted.
CHAOS EXXTREME MOSFET Amplifier User’s Manual - page 3
