EQ

The RP250’s EQ helps further shape your tone with Bass, Midrange, and Treble controls. To help get you started, there are four preset EQ curves: Mid Boost (midbst), Scoop (ScooP), Bright (BRight), and Warm (WarM) that can be selected using Knob 1. Bass, Midrange, and Treble parameters range from -12dB to +12dB.

EQ Model - Knob 1 selects between 4 different EQ modes (Mid Boost, Scoop, Bright, and Warm), each with different frequency centers for Mid and Treble. Pressing this knob turns the EQ on and off.

Bass - Knob 2 adjusts the amount of low end level (Bass). Mid - Knob 3 adjusts the midrange level.

Mid Freq (X-EditTMonly) - This parameter selects the frequency that the Mid parameter adjusts. Ranges from 300 Hz to 5000 Hz.

Treb - Knob 4 adjusts the high end level (Treble).

Treb Freq (X-Edit only) - This parameter selects the frequency that the Treb parameter adjusts. Ranges from 500 Hz to 8000 Hz.

Noise Gate

A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto volume swell effect.

Gate Model - Knob 1 selects between the DigiTech® noise gate or the volume swell effect. Values include: gate (Selects the noise gate) and swEll (Selects the volume swell effect.) Press this knob to turn the noise gate on and off.

26Threshold/Swell Sensitivity - Knob 2 sets the signal strength (Threshold) required to

Page 32
Image 32
Boss Audio Systems RP250 user manual Noise Gate