• Check battery pack installation.
• Check battery pack charging requirements.
• Insert battery pack into
charger until green LED appears.
• Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.
• Move charger and battery
pack to a surrounding air temperature of above 40 degrees F (4.5°C) or below 105 degrees F (+40.5°C).
•Allow battery pack to cool down.
• Place on charger and allow to charge.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003.

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our service website at www.bostitch.com. You can also order parts from your nearest Bostitch Factory Service Center or Bostitch Authorized Warranty Service Center. Or, you can call our Customer Care Center at (800) 262 2161.

Troubleshooting

Problem

Possible Cause

Possible Solution

• Unit will not start.

•Battery pack not installed properly.

•Battery pack not charged.

• Battery pack will not

• Battery pack not inserted into

charge.

charger.

 

• Charger not plugged in.

 

• Surrounding air temperature

 

too hot or too cold.

• Unit shuts off abruptly. • Battery pack has reached its maximum thermal limit.

• Out of charge. ( To maximize the life of the battery pack it is designed to shutoff abruptly when the charge is depleted.)

For assistance with your product, visit our website at www.bostitch.com for a list of service centers, or call the Bostitch Customer Care Center at (800) 262 2161.

11

Page 10 Page 12
Page 11
Image 11
Bostitch BTC400LB instruction manual Maintenance, Replacement Parts, Problem Possible Cause
Page 10 Page 12

BTC400LB specifications

The Bostitch BTC400LB is a versatile and powerful cordless brad nailer designed for both professional contractors and DIY enthusiasts. Known for its reliability and user-friendly features, this tool simplifies the nailing process, making it an invaluable addition to any tool kit.

One of the standout features of the BTC400LB is its cordless design, powered by a robust lithium-ion battery. This technology not only eliminates the need for a bulky air compressor or cumbersome cords but also ensures consistent power delivery throughout your projects. The tool is equipped with a 20V MAX battery, which provides a higher voltage for increased power and efficiency, allowing users to work for extended periods without worrying about recharging.

The Bostitch BTC400LB boasts a lightweight and compact design, making it easy to maneuver in tight spaces and reducing user fatigue during extended use. At just over 5 pounds, it is designed for comfort, with an ergonomic handle that provides a secure grip, enhancing control while driving brads. This nailer is engineered to shoot 18-gauge brads ranging from 5/8-inch to 2 inches in length, making it suitable for various applications, such as trim work, molding, and cabinetry.

Another significant advancement in the BTC400LB is its adjustable depth control. This feature allows users to customize the depth of each nail, ensuring a flush finish every time. Additionally, the tool includes a tool-free jam release mechanism, which makes it easy to clear any jams that may occur during operation, minimizing downtime and enhancing productivity.

Safety is also a key consideration in the design of the Bostitch BTC400LB. The nailer comes with a safety tip that prevents accidental firing, ensuring that the tool is used safely and effectively. It also features an integrated LED work light, which illuminates your workspace, making it easier to see your work, especially in dimly lit environments.

Furthermore, the BTC400LB is designed with an easy-to-load magazine that holds up to 100 brads, reducing the frequency of reloads and allowing for uninterrupted work. Overall, the Bostitch BTC400LB combines advanced technology with practical features, making it an ideal choice for a wide range of nailing tasks, and solidifying its reputation as a reliable tool in both professional and hobbyist settings.
Top Page Image Contents