Problem | Troubleshooting | |
Possible Cause | Possible Solution | |
• Unit will not start. | • Cord not plugged in. | • Plug tool into a working outlet. |
| • Circuit fuse is blown. | • Replace circuit fuse. (If the |
|
| product repeatedly causes the |
|
| circuit fuse to blow, discontinue |
|
| use immediately and have it |
|
| serviced at a Bostitch |
|
| service center or authorized |
| • Circuit breaker is tripped. | servicer.) |
| • Reset circuit breaker. (If the | |
|
| product repeatedly causes the |
|
| circuit breaker to trip, |
|
| discontinue use immediately |
|
| and have it serviced at a |
|
| Bostitch service center or |
| • Cord or switch is damaged. | authorized servicer.) |
| • Have cord or switch replaced | |
|
| at a Bostitch Service |
• Broken blade stuck | • Broken blade is held in place | Center or Authorized Servicer |
• Follow the steps under “To | ||
inside clamp. | by pin inside clamp. | Remove a Broken Blade” to |
|
| disengage pin. |
For assistance with your product, visit our website at www.bostitch.com. for a list of service centers, or call the Bostitch Customer Care Center at (800)
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website at www.bostitch.com. You can also order parts from your nearest Bostitch Factory Service Center or Bostitch Authorized Warranty Service Center. Or, you can call our Customer Care Center at (800) 262 2161.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about Bostitch, its factory service centers or authorized warranty
8
