TOOL OPERATION CHECK

CAUTION: Remove all fasteners from tool before performing tool operation check.

1.CONTACT TRIP OPERATION:

A.With finger off the trigger, press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface, and pull the trigger.

THE TOOL MUST NOT CYCLE.

C.With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.

THE TOOL MUST CYCLE.

D.Without touching the trigger, press the contact trip against the work surface, then pull the trigger.

THE TOOL MUST CYCLE.

2.SEQUENTIAL TRIP OPERATION:

A.Press the contact trip against the work surface, without touching the trigger.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface and pull the trigger.

THE TOOL MUST NOT CYCLE.

Release the trigger. The trigger must return to the trigger stop on the frame.

C.Pull the trigger and press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

D.With finger off the trigger, press the contact trip against the work surface. Pull the trigger.

THE TOOL MUST CYCLE.

3.TRIGGER OPERATED TOOL:

A.With finger off the trigger, hold the tool with a firm grip on the handle.

B.Place the nose of the tool against the work surface.

C.Pull the trigger to drive fastener. Release the trigger and cycle is complete.

CAUTION: THE TOOL WILL CYCLE EACH TIME THE TRIGGER INTERLOCK AND TRIGGER IS PULLED!

MAINTAINING THE PNEUMATIC TOOL

When working on air tools, note the warnings in this manual and use extra care evaluating problem tools.

REPLACEMENT PARTS:

BOSTITCH replacement parts are recommended. Do not use modified parts or parts which will not give equivalent performance to the original equipment.

ASSEMBLY PROCEDURE FOR SEALS:

When repairing a tool, make sure the internal parts are clean and lubricated. Use MAGNALUBE

or equivalent on all “O”-rings. Coat each “O”-ring with MAGNALUBE before assembling. Use a small amount of oil on all moving surfaces and pivots. After reassembly add a few drops of Bostitch air tool lubricant through the air line fitting before testing.

AIR SUPPLY-PRESSURE AND VOLUME:

Air volume is as important as air pressure. The air volume supplied to the tool may be inadequate because of undersize fittings and hoses, or from the effects of dirt and water in the system. Restricted air flow will prevent the tool from receiving an adequate volume of air, even though the pressure reading is high. The results will be slow operation, misfeeds or reduced driving power. Before evaluating tool problems for these symptoms, trace the air supply from the tool to the supply source for restrictive connectors, swivel fittings, low points containing water and anything else that would prevent full volume flow of air to the tool.

9

Page 9
Image 9
Bostitch RN46 manual Tool Operation Check, Maintaining the Pneumatic Tool

RN46 specifications

The Bostitch RN46 is a reliable and powerful roofing nailer designed for professionals in the construction industry. Renowned for its efficiency and durability, this tool has become a favorite among roofers and contractors working on residential and commercial projects alike.

One of the standout features of the RN46 is its lightweight design, weighing just around 6.4 pounds, which allows for extended use without causing excessive fatigue. The nailer is built with an aluminum housing that enhances its durability, ensuring it can withstand the rigors of job site conditions. The RN46 is equipped with an adjustable depth control that enables users to set the depth of their nails with precision, accommodating various roofing materials effortlessly.

Incorporating advanced technologies, the Bostitch RN46 features a high-capacity magazine that holds up to 120 nails, reducing the frequency of reloads and maximizing productivity. It is compatible with 15-gauge wire collated roofing nails, which are ideal for applications involving asphalt shingles, wooden shakes, and other roofing materials. The tool is designed for rapid-fire operation, allowing users to achieve higher speeds in nail placement.

The RN46 comes with a 360-degree adjustable exhaust that directs exhaust air away from the user and the work surface, maintaining a clean environment and enhancing comfort during operation. Additionally, it features a removable nosepiece for easy troubleshooting and maintenance, ensuring that it remains in optimal working condition over time.

The Bostitch RN46 is also equipped with a secure lock mechanism that prevents accidental firing, enhancing safety for users in high-paced environments. Its ergonomic handle provides a comfortable grip, further facilitating prolonged use without strain.

Overall, the Bostitch RN46 roofing nailer is a top-tier tool that combines innovative features with user-friendly design. Whether for new roof installations or repairs, this nailer provides consistent performance, making it an essential addition to any roofing professional's toolkit. Its blend of power, efficiency, and durability sets it apart as a trusted choice for those looking to tackle roofing projects with confidence.