Boston Acoustics 1005 manual Introduction, Technical Specifications, Parts List

Specifications

Introduction

Thank you for choosing Boston Acoustics and congratulations, you’ve made the right choice. You’re now equipped for the open road. Your high performance GTA amplifiers are engineered to perform and built to last. These products represent the pinnacle of performance and innovation that Boston Acoustics is famous for. We hope you enjoy your amplifier and the road ahead.

Technical Specifications:

	Front & Rear Channels	Subwoofer Channel
Rated Power (CEA-2006-A):
@ 4-Ohm (Stereo):	50 Watts x 4	N/A
@ 2-Ohm (Stereo):	80 Watts x 4	N/A
@ 4-Ohm (Mono):	160 Watts x 2	250 Watts x 1
@ 2-Ohm (Mono):	N/A	400 Watts x 1
Impedance Stability:	2Ω St / 4Ω Mono	2Ω
Frequency Response (-3dB):	10Hz–50kHz	10Hz–150Hz
Signal-to-Noise Ratio:	>90dB	>90dB
(A Weighted)
THD+N:	0.05	0.05
Highpass Crossover:
Frequency Range:	50Hz - 200Hz	10Hz - 50Hz
Slope (dB Per Octave):	12dB	12dB
Lowpass Crossover:
Frequency Range:	50Hz - 200Hz	50Hz - 150Hz
Slope (dB Per Octave):	12dB	12dB
Signal Voltage Input Range:
Low Level (RCA) Input:	200mv - 5v
Speaker Level Input:	400mv - 10v
Fuse Amp Rating (ATC):	3 x 25 Amp
Dimensions:
Width:	21 1⁄4” (538mm)
Height:	2 3⁄8” (60mm)
Depth:	8 3⁄8” (211mm)

Parts List:

Owners Manual:	x 1
2mm Hex Wrench:	x 1
3mm Hex Wrench:	x 1
4mm Hex Wrench:	x 1
Speaker Level Input Cable:	x 1
Mounting Screws:	x 4
Replacement Fuses (ATC):	x 3 (25 amp)

2