Quick Guide Did you know TVee™ can learn your television remote control?
If your television can be setup to change the audio volume it sends to TVee, you don’t need this quick start guide.
Example: Teach TVee to respond to the Volume T button of your television remote control.
Step1
3 SEC
Put TVee into “learning mode”
1SFTTBOEholdGPS three seconds until
Step2 Select button on TVee to learn | Step3 Press same button on your remote |
{ in this example VOLUME UP ON TVee } | { in this example VOLUME UP ON YOUR REMOTE } |
1SFTT7PMVNF6QCVUUPOBOE
release(approximatelyuntil
Repeat steps 1-3 to set up:
VOLUME DOWN
UVSOTPMJEPSBOHF
Not working?
1SEC | 1SEC |
PRESSRELEASE
MUTE
POWER
Cable/Satellite users
TVee can also work with your cable or satellite programmable remote control provided it’s already setup to control your television. Some of these types of programmable remotes require you to setup TVee from the original television remote. Setting up TVee this way should allow for proper operation with the programmable remote.
If the light flashes red then TVee was not able to learn the signal from your television remote.
Repeat steps 1 – 3 using the following tips:•Point your remote control at the middle of the TVee Soundbar.
•Hold the remote control about 12 inches from the front of the TVee Soundbar.
•Hold the remote control steady, don’t let it move around while you press and release the button.
•Press and release the button s l o w l y – for at least a full second for each press and release step.
300 Jubilee Drive, Peabody, MA 01960 bostonacoustics.com
© 2007. All rights reserved. Boston and Boston Acoustics are registered trademarks, and the B/A ellipse symbol, and TVee are trademarks of Boston Acoustics, Inc.
