Bounty Hunter 1100 QUICK-START DEMONSTRATION continued, VI. Press the MODE touchpad again

QUICK-START DEMONSTRATION (continued)

VI. Press the MODE touchpad again.

a. A flashing indicator will point toward IRON.

b. The flashing indicator tells us that Iron has been eliminated from detection.

VII. Wave the Nail over the Search Coil a. The Nail will not be detected.

b. The Nail has been "Discriminated Out."

VIII. Wave the Quarter, Penny, and Pull-Tab over the Search Coil

These non-ferrous objects will be detected with their own distinctive tones.

IX. Press the MODE touchpad again.

a.The detector will beep twice and the sensitivity setting will flash on the left side of the display.

b.Notice the flashing arrow pointing toward Iron.

The flashing arrow indicates that this target category is currently "Discriminated Out."

X. Press the MODE touchpad again.

The flashing arrow will now point toward MID-RANGE.

XI. Wave all objects over the Search Coil The Pull-Tab and Zinc Penny will not be detected.

The other objects will be detected with their own distinctive tones.

XII. Toggle modes by pressing the MODE touchpad again.

a. Press once to see the current discrimination status of the detector (Mid-Range Eliminated).

b. Then press again to toggle to the third discrimination setting.

i.Iron is eliminated.

ii.Mid-Range Metals are eliminated.

iii.Only high-tone metals like silver and copper will be detected.

8