Two auxiliary outlets, EXTENTIONSOCKET 1 and EXTENTIONSOCKET 2, ar e pro vide d,
pur el y to provide a charging source for up to two Gemini Monoblocs. One or two Gemini’s
can be used on their own or in conjunction with the normal flash heads. The major effect of
using these outlets, in addition to the normal flash heads, is to slow down the overall recycle
time of the pack. Each Gemini controls the charge by itself according to its own setting and
there are NO user controls on the pack for these.
A Travel-Pak cable, BW-7632 as supplied with the
Gemini, is required for each Gemini. DO NOT use
any other type of cable or damage may result.
If only one of the auxiliary outlets is used please
make sure that the dummy socket, attached to the
cable, is fitted to the other extension socket.
Once connected, switch the power on the Gemini(s) to position II. Switch the Explorer on.
The Gemini(s) will now charge followed by the pack. Adjust the flash power on the
Gemini(s) and set up as required. If more than one Gemini is fitted then wait until both are
ready before firing. If the pack is being flashed simultaneously with the Gemini then the
READY indicator on the pack indicates that the overall set-up is READY.
Use is as normal except the Gemini modelling light will not be available.
For correct and safe operation of the Gemini please refer to the relevant instructions.
IntroductionSafety NotesConnecting Esprit Gemini Monobloc Heads

ALWAYS

• Switch the pack OFF before connecting or disconnecting ANY cables from the pack or
changing a flash tube or bulb on a flash head.
• Fit only Bowens approved equipment to this unit.
• Have the unit checked out before using if it is dropped or damaged in any way.
• Have the unit checked by an authorised service centre only, due to the high energy/high
voltage of the units.
• Use a Bowens approved charger with this unit.
• Take care not to drop the battery cassette - the battery is heavier than its size may suggest.
• Keep the battery cassette clean and dry to prevent contamination of the contacts and fuses.
Do not use any organic solvents or detergents. Wipe with a clean dry cloth.
• Recharge the battery as soon as possible after use. The battery has no so-called memory
effect so for longest life keep fully charged at all times.
• Fully charge every 6-9 weeks to maintain battery condition (if possible leave the battery
cassette on charge indefinately).
• Run skin under water immediately if contact made with electrolyde (acid).
318
Dear Valued Customer,
Thank you for choosing the Bowens Explorer 1500. The Explorer 1500 has been designed using
the latest technology to produce a unit that is simple to operate, yet has a powerful, highly
controllable and accurate output.
For details of all related products, please contact your local distributor, a list of which can be
found at www.bowens.co.uk
In order to obtain the full benefit from your purchase, please take a few moments to familiarise
yourself with this user guide.
Thank you.
Bowens International Ltd.