QUAD2400
10www.bowensinternational.com
QUAD2400
Number of Channels
Number of Head Sockets
Symmetric/Asymmetric
Master Power Control
Independent Channel Variators
Stored Energy (Max.)
Flash Power Control Range
Guide Number
(Full power, 50° Keylite, ISO 100)
Typical Recycle Time (Full Power, 230V, 50Hz)
Flash Colour Temperature
Flash Duration (t=0.5) (One Head, Max. Variator)
Power Level Display
Flash Voltage Stabilization
Supply Voltage
Flash Ready Indication
Overload Protection
Sync Voltage (Max.)
Photocell
Audio Ready Signal
Modelling Lamps
Modelling Modes
Recommended Flash Head Dimensions (l x w x h)
Weight
Introduction
Dear Valued Customer,
Thank you for choosing the Bowens QUAD2400 professional flash system.
Accurate, ergonomic, powerful and simple to use, the QUAD2400 power pack was designed by working closely with photographers to develop a flash that meets the standards demanded in professional studios today.
Heads and accessories from the QUAD range can be used with the QUAD2400 power packs. For details of all related products, please contact your local distributor, a list of which can be found at www.bowensinternational.com.
In order to obtain the full benefit from your purchase, please take a few moments to familiarise yourself with this user manual.
Thank you.
Bowens International Ltd.
Safety Notes
DO NOT:
•Use in an environment where moisture or flammable vapor is likely to come in contact with the pack or the flash heads.
•Plug or unplug flash heads without first switching power off.
•Restrict air vents while in use.
•Use a unit with damaged housing, moldings, flash tube or modelling lamp.
If the unit is dropped or damaged in any way, always have it checked out before using.
•Operate the unit without a safe grounded AC supply.
DO:
•Switch power off and disconnect from the supply before changing modelling bulb or flash tube.
•Observe the AC power supply requirements.
•Ensure that the flash head cable locking rings at the power pack or adapters are fully locked before use.
•Avoid placing cables where they can be tripped over. Protect from heavy, sharp or hot objects, which may cause damage and replace damaged cables immediately.
•Unplug the power pack from the electrical outlet when not in use.
•Remove the power cord by gripping the plug. NEVER pull the cord.
•Ensure that any extension cord used has a suitable current rating to prevent overheating. NEVER use coiled extension cords.
•ALWAYS remove the flash head covers before using.
www.bowensinternational.com 3
