Bowers & Wilkins 202i specifications Product Summary, Technical highlights, Drive Units, Finish

2 0 2 i

S t a n d - m o u n t / B o o k s h e l f l o u d s p e a k e r s y s t e m

Product Summary

●The 200 series was deemed as the rarity in the mass consumer hi-fi market – a reasonably priced loudspeaker that provided high sensitivity, extended linear frequency response and pinpoint stereo imaging.

●The 202i loudspeaker system is a fourth-order vented loudspeaker system. The speaker comprises of a 3/4 -in high frequency with a polyamide dome and one 7in low frequency polypropylene cone.

●The B&W wall bracket accessory permits easy, multi-directional positioning on walls.

Technical highlights

●The Design incorporates a cabinet profile and wedge shaped grilles on acoustically transparent frames.

●The magnetic fluid-cooled voice coils are a B&W hallmark, wound on glass reinforced Kapton® formers, enabling the drivers to take the heat when reproducing modern digital recordings.

●In common with B&W tweeters, the lightweight units incorporate low viscosity magnetic fluids to offer excellent power handling and linearity.

Drive Units	1 x 19mm high-frequency with polyester	Power Handling	Suitable for amplifiers up to 120W
	dome		Continuous
	1 x 180mm low frequency with	Dimensions	Height: 497mm Width: 225mm
	composite short fibre cone		Depth: 222mm
Frequency Response 48Hz – 20kHz ± 3dB on reference axis		Finish	Black ash vinyl
Sensitivity	90dB spl(2.83V 1m)
Nominal Impedance	4 ohms

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com