Manuals / Bowers & Wilkins / Home Audio / Speaker

Bowers & Wilkins manual Installing CCM6 Series Speakers

Models: CCM6

1 8
Download 8 pages 62.14 Kb
Page 5
Image 5

4. Installing CCM6 Series Speakers

CCM663SR - CCM664SR

SURROUND

STEREO

To install a CCM6 Series speaker proceed as described in the following paragraphs:

4.1Using the supplied cut-out template, mark a cut line on the existing ceiling. Check the cut line defines the correct diameter. Cut along the line with an appropriate tool to create a round aperture in the ceiling.

Note: Ensure that there is enough free space internally adjacent to the aperture for the spring clamps.

Note: To reduce the possibility of the ceiling buzzing or rattling, adhesive mastic can be applied between the studs and sheetrock in the vicinity of the speaker aperture.

4.2If speaker cable is already present in the ceiling space, pull the cable down through the aperture. If speaker cables are not already installed this should be done at this stage. It is likely that you will need to gain access through the floor above to route the cables through the ceiling space.

Leave enough spare cable through the aperture to ease connection to the speaker back box, but not so much that it is likely to buzz or rattle when pushed back up into the ceiling space. Approximately 1.0m (3 ft) is appropriate.

Note: Always use high quality, low resistance speaker cable. Low resistance is especially important if the length of cable from amplifier to speaker exceeds 5m. Your local Bowers & Wilkins retailer will be able to offer advice on speaker cable selection if required.

4.3Now connect the speaker cable to the spring terminals on the side of the frame. Ensure that the speaker connection polarity is correct: the cable connected to the positive terminal on the amplifier should be connected to the red spring terminal on the frame. Similarly, the cable connected to the negative terminal on the amplifier should be connected to the black spring terminal on the frame. The diagram above illustrates cable connection.

When connecting a CCM664SR or CCM663SR in surround mode, simply connect the speaker cable to either the left or right set of terminals. Please ensure that the switch on the back is set to surround.

Note: If an amplifier is already connected to the cable it should be switched off while connections are being made to the frame.

4.4With the frame connected it may be lifted up into the ceiling aperture. On speakers with tilting tweeters, correct frame orientation must be established at this stage: the red arrow on the frame flange should be pointing towards the listening area.

Ensure that the four QuickDog™ (spring clamps) are rotated so that they will pass through the aperture then lift the frame up so that the flange is flush on the ceiling. Take care that the cable is not trapped. Now reach inside the aperture with one hand, rotate the QuickDogs™ outwards and, using two fingers and thumb, pull each QuickDog™ downwards so that the frame is fixed securely. The diagram above illustrates insertion of the frame.

Note: To release a QuickDog™ push the metal tab, located just below the finger platform, upwards.

5

Page 4 Page 6
Page 5
Image 5
Bowers & Wilkins manual Installing CCM6 Series Speakers
Page 4 Page 6

CCM6 specifications

Bowers & Wilkins CCM6 is a remarkable in-ceiling loudspeaker that epitomizes high-performance audio in a compact design. Designed for both music enthusiasts and movie lovers, the CCM6 delivers exceptional sound quality, making it a perfect choice for whole-home audio systems, home theaters, or background music setups.

One of the standout features of the CCM6 is its 6.5-inch Kevlar cone woofer. Kevlar is renowned for its strength and lightness, enabling the woofer to produce clear and accurate midrange tones while handling power efficiently. This design choice ensures that the speaker can replicate music and movie soundtracks with impressive fidelity, delivering a balanced listening experience.

Complementing the woofer is a one-inch soft dome tweeter that offers extended high-frequency response. The tweeter is engineered to provide smooth, natural highs, capturing the nuances of vocal performances and intricate sound effects. Together, the woofer and tweeter create a well-rounded soundstage that immerses listeners in their favorite audio content.

An important technological feature of the CCM6 is its integrated 180-degree swivel tweeter. This allows for optimal sound dispersion and ensures that listeners can enjoy high-quality audio from various positions within the room. This flexibility is particularly beneficial in larger spaces or unconventional seating arrangements.

The CCM6 is designed with practicality in mind. Its sleek, low-profile design makes installation straightforward, as it can seamlessly blend into any ceiling decor. The paintable magnetic grill further enhances this integration, allowing users to customize the speaker’s appearance to match their home interior.

Another significant characteristic of the CCM6 is its robust construction. Built to withstand the rigors of various environments, this speaker is suitable for any room of the house, including kitchens and bathrooms. The moisture-resistant materials ensure that the performance remains uncompromised, even in humid conditions.

In summary, the Bowers & Wilkins CCM6 stands as a testament to premium audio engineering. With its combination of a Kevlar cone woofer, soft dome tweeter, and intelligent design features, it delivers a captivating listening experience. Whether for critical listening or casual enjoyment, the CCM6 proves to be an excellent choice for those seeking high-quality in-ceiling sound solutions.