Bowers & Wilkins DM7 specifications Technical highlights

D M 7

S t a n d - m o u n t l o u d s p e a k e r s y s t e m

Product Summary

●The DM7 is a precision, three-unit loudspeaker system featuring entirely new purpose-designed drive units and compact (approx. 40 litre) enclosure.

●Our lengthy programme of design and development has been completed with excellence of performance rather than cost in mind. Used stereophonically or quadrophonically, your new speakers will achieve the very highest standards of fidelity in the reproduction of original sound.

Technical highlights

●The integral stand positions the loudspeaker at the optimal listening height for accurate amplitude and phase-coherent information within the listening window.

●The tweeter has contoured control giving four positions for selection of optimum or suitable speaker performance.

●The bass/mid-range transducer based on a B&W cone matrix of aromatic polyamide fibres. The acoustic drive bass radiator supplements response below 100Hz.

Drive Units	1 x 26mm multi-filament polyester	Nominal Impedance	8 ohms nominal
	weave dome	Power Handling	200W
	2 x 160mm aromatic polymide fibre	Dimensions	Height: 900mm Width: 270mm
	matrix cone.		Depth: 382mm
Frequency Response 30Hz – 25kHz. Better than ± 2dB,		Finish	Standard: teak or walnut
	70Hz to 20kHZ on measuring axis.		Special: rosewood or black ash
Sensitivity	10 volts rms for spl of 95dB at 1m

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com